Setting The Service Display; Speed, Time, And Dst Distance 1 - Husqvarna TE 125 EU 2015 Owner's Manual

7 SPEEDOMETER
7.7

Setting the service display

7.8

Speed, time, and DST distance 1

–
Wait for 5 seconds.
The speedometer changes to the next menu item. The
Resetting the time
–
Press the left button.
The value decreases.
Advancing the time
–
Press the right button.
The value increases.
401912-01
Condition
The motorcycle is stationary.
–
Press both buttons for 3–5 seconds.
The Setup menu is displayed. The UNIT display flashes.
–
Wait for the menu of the service display
–
Set the service.
Shortening the service interval
–
Press the left button.
The value decreases.
Extending the service interval
401913-01 –
Press the right button.
The value increases.
Switching off the service interval display
–
Press and hold the left button.
off appears on the display.
401914-01
–
Press one of the buttons until DST appears on the speedometer.
KM/H or M/H shows the speed.
shows the time.
DST shows the distance since the last reset, such as between two refueling stops.
Info
If the value of 39999.9 is exceeded, DST is automatically reset to 0.0.
Press the left but-
ton briefly.
401901-01
Press the left but-
ton for 3 – 5 sec-
onds.
Press the right but-
ton briefly.
Press the right but-
ton for 3 – 5 sec-
onds.
to flash.
Next display mode
DST can be preset to a value between 0.0 and 39999.9 by
pressing the buttons.
Next display mode
DST is reset to 0.0.
23
symbol flashes.