Preparing For Rides On Wet And Muddy Surfaces; Preparing For Rides At High Temperature And Slow Speed - Husqvarna TE 125 EU 2015 Owner's Manual

8 PREPARING FOR USE
8.6

Preparing for rides on wet and muddy surfaces

8.7

Preparing for rides at high temperature and slow speed

–
Change the radiator cap.
–
Mount a rain cover on the air filter.
Rain cover for air filter (77206921100)
Info
Observe the Husky Power fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
B00437-01
The recommended carburetor tuning is available from your authorized Husq-
varna workshop.
–
Clean the chain.
–
Mount the steel sprocket.
Tip
Do not grease the chain.
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
600868-01
–
Mount a rain cover on the air filter.
Rain cover for air filter (77206921100)
Info
Observe the Husky Power fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
B00437-01
The recommended carburetor tuning is available from your authorized Husq-
varna workshop.
–
Mount the steel sprocket.
–
Clean the motorcycle. (
–
Straighten bent radiator fins carefully.
600868-01
–
Check the radiator cap.
Value on radiator cap
» If the displayed value does not equal the setpoint value:
600872-10
p. 102)
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
–
Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine and
cooling system to cool down. In case of scalding, rinse immedi-
ately with lukewarm water.
1.8 bar (26 psi)
28