Labels For Devices; Filling In Labels; Affixing Labels; Affixing A Label To A Signal Cable - H3C CR16000-F Installation Manual

Figure 3 Generic label
1
(1) Dividing line on the label

Labels for devices

A device label is used to identify the device name, model, address, installation date, and so on.

Filling in labels

You can print or write desired contents on labels. As a best practice, print labels.
To print labels, select a label printer and a proper label template as needed. For more information
about using a label printer, see the user guide of the printer.
To write labels, use black markers. A marker has two nibs. Be sure to use the smaller nib to write
labels.

Affixing labels

After printing or writing a label, remove the label from the bottom page and affix it to the signal cable,
or the identification plate of the power cord.

Affixing a label to a signal cable

Typically, a label is affixed 2 cm (0.79 in) away from the connector on a signal cable. You can affix the
label to other positions as needed.
TO:
2
(2) Cut dotted line
Figure 4 shows how to affix a label when a cable is laid vertically.
3