H3C CR16000-F Installation Manual page 16

Model Chassis depth
Total depth: 706.5 mm (27.82 in)
•
CR16005E-F/CR16
010E-F
•
Figure 7 describes the depth of the CR16006-F, CR16010-F (one fan tray), CR16010-F (two fan
trays), and CR16014-F chassis.
CR16018-FA, and CR16018-F chassis. Figure 9 describes the depth of the CR16005E-F and
CR16010E-F chassis.
Figure 7 CR16014-F chassis depth
1
1
(1) Ejector levers of the switching fabric modules
81.5 mm (3.21 in) from the
mounting surface of the
mounting brackets to the front
end of the cable management
brackets
625 mm (24.61 in) from the
mounting surface of the
mounting brackets to the latch
on the power supply
Figure 8 describes the depth of the CR16010H-F, CR16010H-FA
661 mm
(26.02 in)
10
Rack requirements
•
A minimum depth of 0.8 m (2.62 ft)
•
A minimum of 84.5 mm (3.33 in) between
the front rack posts and the interior side
of the front door (including the door lock
and handle).
•
A minimum of 628 mm (24.72 in)
between the front rack posts and the
interior side of the rear door (including
the door lock and handle).
95 mm
(3.74 in)
(2) Cable management bracket
,
2