Installing Mounting Brackets - H3C CR16000-F Installation Manual

The CR16014-F router comes with the signal cable management brackets attached to the mounting
brackets. You need to install the power cord management bracket for the router.
To install the power cord management bracket:
1. Unpack the power cord management bracket.
2. Place the power cord management bracket against the chassis and align the mounting holes in
the bracket with the installation holes in the chassis.
3. Use screws to secure the power cord management bracket to the chassis.
Figure 2 Installing a power cord management bracket

Installing mounting brackets

Before installing the router in the rack, attach the mounting brackets to the chassis.
The left and right mounting brackets available for the router are labeled with L and R marks,
respectively.
To install the mounting brackets, face the front of the router, and attach the left and right mounting
brackets to the two sides of the router, as shown in
1
2
2
2
Figure 3.
3