Event Log Configuration; Mps Configuration; Remote Access Configuration; Usb Configuration - Supermicro AS-1010S-MR User Manual

AS1010S-MR User's Manual
Headless Mode
Select "Enabled" to activate the Headless Operation Mode through ACPI.
The options are Enabled and Disabled.
Event Log Confi guration
View Event Log
Highlight this item and press <Enter> to view the contents of the event log.
Mark All Events as Read
Highlight this item and press <Enter> to mark the DMI events as read.
Clear Event Log
This setting will clear all event logs when set to "OK". The options are OK and
Cancel.
Event Log Statistics
Highlight this item and press <Enter> to view details on the count of total unread
events.
MPS Confi guration
MPS Revision
This setting allows the user to select the MPS revision level. The options are
1.1 and 1.4.
Remote Access Confi guration
Remote Access
Use this setting to Enable or Disable remote access. If Enabled is selected,
you can select a Remote Access type.
USB Confi guration
This screen will display the module version and all USB enabled devices.
7-10