Sensor Voltage Display Mode - Horiba Scientific LAQUAtwin B-74 Series Manual

7.6

Sensor voltage display mode

Displays the voltage output from the sensor.
Use this function to evaluate the sensor performance or to create your own
calibration line or curve.
1.
Press and hold the MEAS switch for over 3
seconds in the measurement mode to
enter the special setting mode.
All items appear on the LCD, and then the dis-
play changes as shown right.
2.
Press the CAL switch until mV appears.
3.
Press the MEAS switch for 0.5 seconds.
The voltage output from the sensor is displayed.
4.
Press the MEAS switch to return the measurement mode.
24