Horiba Scientific LAQUAtwin B-74 Series Manual page 64

CAL switch*
CAL switch*
CAL switch*
CAL switch*
Returns to the display for measurement unit setting.
MEAS
switch
"7.6 Sensor voltage display mode" (page 24)
Displays the voltage output from the sensor.
MEAS
switch "7.7 Low calibration value setting" (page 25)
Used to change calibration value.
MEAS
"7.8 Initialization mode" (page 27)
switch
All settings and calibration data are reset to the
factory default values.
"7.9 Software version display mode" (page 27)
The current software version is displayed.
18