Horiba Scientific LAQUAtwin B-74 Series Manual page 42

Preface
This manual describes the operation of the COMPACT NO
Be sure to read this manual before using the product to ensure proper
and safe operation of the instrument. Also safely store the manual so it is
readily available whenever necessary.
Product specifications and appearance, as well as the contents of this
manual are subject to change without notice.
This is the English translation of an original Japanese document.
 Warranty and Responsibility
HORIBA Advanced Techno Co., Ltd. warrants that the Product shall be free
from defects in material and workmanship and agrees to repair or replace
free of charge, at option of HORIBA Advanced Techno Co., Ltd., any
malfunctioned or damaged Product attributable to responsibility of HORIBA
Advanced Techno Co., Ltd. for a period of one (1) year from the delivery
unless otherwise agreed with a written agreement. In any one of the
following cases, none of the warranties set forth herein shall be extended;
 Any malfunction or damage attributable to improper operation
 Any malfunction attributable to repair or modification by any person
not authorized by HORIBA Advanced Techno Co., Ltd.
 Any malfunction or damage attributable to the use in an environment not
specified in this manual
 Any malfunction or damage attributable to violation of the instructions in
this manual or operations in the manner not specified in this manual
 Any malfunction or damage attributable to any cause or causes
beyond the reasonable control of HORIBA Advanced Techno Co.,
Ltd. such as natural disasters
 Any deterioration in appearance attributable to corrosion, rust, and so on
 Replacement of consumables such as the sensor and standard solutions
HORIBA Advanced Techno Co., Ltd. SHALL NOT BE LIABLE FOR ANY
DAMAGES RESULTING FROM ANY MALFUNCTIONS OF THE PRODUCT,
ANY ERASURE OF DATA, OR ANY OTHER USES OF THE PRODUCT.
 Trademarks
 OnGuard is a registered trademark or trademark of DIONEX
corporation in the United States and other countries.
Other company names and brand names are either registered
trademarks or trademarks of the respective companies. (R), (TM)
symbols may be omitted in this manual.
January, 2017 © 2017 HORIBA Advanced Techno Co., Ltd.
-
METER, B-74X.
3