Drive Settings; Table 4-17 Drive Settings Submenu; Table 4-18 Port Setting Submenu - NEC LL030F User Manual

4.4.2.3 Drive Settings

Submenu item
Port-A
Port-B
Media changer path
Apply
Submenu item
Drive path
Link Speed
(SAS model.)
Topology
(It is non-display in
the SAS model.)
Set Loop ID
(It is non-display in
the SAS model.)
Link Speed
(FC model.)

Table 4-17 Drive Settings Submenu

Default Description
- Setting of Port A of the selected drive.
- Setting of Port B of the selected drive.
A set content is the same as PortA. The license is
necessary for the setting.
Drive #1 Set the drive that controls the library.
Enable
Drive #2-#4
Disable
- The above-mentioned setting is applied.

Table 4-18 port setting submenu

Default Description
Port –A:Enbale
Setting of port-A(Enable / Disable)
3Gbps Link Speed:
Specify the drive max Link Speed,
"3Gbps", "6Gbps" are selectable.
Point to point Specify the topology type
000 Specify the three-digit number Loop ID.
Valid number range is 000-125.
Link Speed: Specify the drive Link Speed, "Auto",
8Gbps
"1Gbps", "2Gbps",
selectable.
-51-
"4Gbps" or "8Gbps" are