Replacing The Front Bezel R - NEC LL030F User Manual

10.14 Replacing the Front bezel R

1. The supervisory service of all the services of backup software, a tape, and a changer driver is
suspended.The Windows version Networker stops a server.
2. Turn off the power to the library.
3. Remove the library from the rack and remove the upper and lower front magazines.
4. Remove the four right screws from the front of the library and remove rack bracket front R.
5. Remove the three left screws of bezel R and remove bezel R.
The figure below shows T60A. For T30A, remove two screws.
Screws
6. Mount bezel R using the opposite procedure to the procedure used to demount it.
7. Insert the front magazine and turn on the power to the library.
-186-
Rack bracket R