Rebooting Drive - NEC LL030F User Manual

4.10 Rebooting Drive

If a reset is executed without first executing the following steps, the device and/or
cartridge may be damaged, and data may be lost.
A reboot (initialization) is required in the following cases.
・When a system administrator or maintenance engineer has ordered a reboot of the Library.
・When errors have occurred in the Accessor and/or drive.
The following describes the steps for rebooting the library.
1) [Login]. See Section 4.3Login for detail.
2) Make sure that all jobs have been completed. If the library is in online state, set it to offline.
See Section 4.5.4Switching between ONLINE
3) Select [Reboot Drive] from [Commands].
4) The confirming message will appear.Setting is applied by selecting [Yes].
5) The drive reboots.
and OFFLINE
-75-
for details.