Using Lto2 / Lto3 Tape Medium; Enabling Or Disableing Enctyption For Each Tape Medium; Figure 6-9 Encryption Detail - NEC LL030F User Manual

6.3.1 Using LTO2 / LTO3 Tape Medium

The tape cartridge that can be encrypted becomes the tape medium since LTO4. Therefore, when
the tape cartridge of LTO2 / LTO3 is used, it automatically becomes set to which the encryption is
invalid. Even if it is a tape cartridge of LTO2 / LTO3, for the tape cartridge on which the bar code
label is not stuck, it doesn't automatically become set to which the encryption is invalid.

6.3.2 Enabling or Disableing Enctyption for Each tape medium

You can enable or disable encryption for each tape media. (All slots are encrypted by default.)
You can check the setting for each tape media in [Encryption Detail].
The tape medium stored in a purple slot in the figure below is Enable Encryption, and a tape
medium to which Key Type is set with Auto.
The tape medium stored in a green slot in the figure below is Enable Encryption, and a tape
medium to which Key Type is set with Import.
The tape medium stored in a white slot in the figure below is Disable Encryption.

Figure 6-9 Encryption Detail

-138-