NEC Storage Manager Configuration Settings
n A function allowing you to set network information such as IP
addresses has been added.
n A function allowing you to unlock an optionally purchased product
has been added.
n A function allowing you to bind a logical disk in the same capacity
as an already bound logical disk has been added. The function is
used when specifying the capacity of a logical disk.
NEC Storage AccessControl
n A function allowing you to rename LD Sets has been added.
n Access control can be performed for each LD Set even while the
port mode is active.
NEC Storage PerformanceMonitor
n The real-time monitoring function has been enhanced as follows:
•
Display items (busy ratio, read hit ratio, and write hit ratio) of
the numeric value table have been added.
•
Functions to select the display/non-display of time-series graphs
and change the display order have been added.
n The overload monitoring function has been enhanced as follows:
•
A function to customize conditions for monitoring thresholds
has been added.
•
A function to delete thresholds collectively has been added.
•
A function to reset the threshold excess state when the setting
conditions are satisfied has been added.
•
A function to save thresholds has been added.
Functional Enhancement Overview 3-3