NEC LL030F User Manual page 222

AppendixC Library error code / Drive error code
Code( )
H
No information available for this error code.
0000
Detected firmware defect during power-on
and initializing.
0001
(FRU)
Contoller board
Detected RAM (base area) defect during
power-on and initializing.
0002
(FRU)
Controller board
Detected RAM (buffer space) defect during
power-on and initializing.
0003
(FRU)
Controller board
Reserved
0004
Reserved
0005
Reserved
0006
Cannot detect rear magazine.
0007 (FRU)
Magazine, Maintenance chassis
Cannot detect available drive.
0008 (FRU)
Drive I/F cable, Drive, Controller board
The accessor locking screw is not removed.
0009 (FRU)
The Accessor locking screw
Reserved
000A
The tape cartridge remained in the escape slot
000B because error detected.
Microcode failure#1
000C
Microcode failure#2
000D
Microcode failure#3
000E
000F Microcode failure#4
Library error code (1/16)
Description
-195-
Panel
Indicator
－
Nothing.
To power cycle the library.
All LED on
POWER LED To power cycle the library.
and
FAULT LED
on
To power cycle the library.
CHK
0003
－
－
－
1. Check rear magazine.
CHK
2. To power cycle the library.
0007
To power cycle the library.
CHK
0008
Remove the accessor locking screw.
CHK
0009
－
Check the error logs for failed
CHK
operations immediately before this
000B
error code.
CLEAN,MEDIA
FAULT,FAULT LED
on
MEDIA
FAULT,FAULT LED
on
CLEAN,FAULT LED
on
FAULT LED on
Action