Replacing The Internal Fc Cable - NEC LL030F User Manual

10.12 Replacing the Internal FC cable

1. Pull out the drive and remove the two connectors connected to the drive, referring to
Replacing the Drive Module
"10.5
2. Remove the cable from the cord keeper.
3. Remove the chassis-side connector of the internal FC cable.
The connector cannot be removed by using your fingers the space is too narrow, so remove it by
picking it up with tweezers from above.
4. Pull out the drive from the chassis and remove the drive-side connector of the internal FC cable.
5. Mount the internal FC cable using the opposite procedure to the procedure used to demount it.
6. When inserting the drive and mounting the drive cover, take care not to get the cables caught.
".
Internal FC cable, chassis-side connector
Internal FC cable, drive-side connector
-184-