NEC LL030F User Manual page 234

Code( )
H
Picker cannot move because magazine was
removed.
00C0
(FRU)
Maintenance chassis
When I/O lock release (IOULK) operates, I/O
lock sensor OFF cannot be detected.
00C1 (FRU)
Maintenance chassis,
CONTROLLER BOARD
Reserved
00C2
Reserved
00C3
Reserved
00C4
Picker move error #7（Defect in moving to
RVS position(P1) during the motion other
than GET/PUT(Detected picker origin or
00C5
FWD).)
(FRU)
Maintenance chassis,
CONTROLLER BOARD
Picker move error #8（Defect in moving to
FWD position (P2) during the motion other
than GET/PUT(Not Detected picker origin
00C6
or FWD).)
(FRU)
Maintenance chassis,
CONTROLLER BOARD
Picker move error #9（Defect in moving to
medium extrusion/medium
(P3/P4/P5/P6) during the motion other than
GET/PUT(Not Detected picker origin or
00C7
FWD).)
(FRU)
Maintenance chassis,
CONTROLLER BOARD
Reserved
00C8
Picker calibration error #1 (Cannot detect
CTRG sensor ON during picker calibration.)
00C9 (FRU)
Maintenance chassis,
CONTROLLER BOARD
Picker calibration error #2
(The encoder count became more than the P6
value during picker calibration.)
00CA
(FRU)
Maintenance chassis,
CONTROLLER BOARD
Picker calibration error #3
(The lock position was not able to be detected
during picker calibration.)
00CB
(FRU)
Maintenance chassis,
CONTROLLER BOARD
GET motion error during Picker calibration
(Not detected CTRG sensor ON in GET
motion during Picker calibration.)
00CC
(FRU)
Maintenance chassis,
CONTROLLER BOARD
Reserved
00CD
Not detected lock position during LIMIT
CHECK motion
00CE
(FRU)
Maintenance chassis,
Library error code (13/16)
Description
position
-207-
Panel
Indicator
1. To power cycle the library.
CHK 2. Check the medium.
00C0 3. Check the magazine.
1. To power cycle the library.
2. Check the magazine.
CHK
00C1
－
－
－
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
CHK
00C5
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
CHK
00C6
1. To power cycle the library.
2. Check the medium.
3. Check the magazine.
CHK
00C7
－
Unless calibration operated, this
error does not occur.
CHK
00C9
1. To power cycle the library.
2. Check the medium.
CHK 3. Check the magazine.
00CA
1. To power cycle the library.
2. Check the medium.
CHK 3. Check the magazine.
00CB
1. To power cycle the library.
2. Check the medium.
CHK 3. Check the magazine.
00CC
－
1. To power cycle the library.
CHK 2. Check the medium.
00CE 3. Check the magazine.
Action