Ethernet Connector For Maintenance - NEC LL030F User Manual

1.3.3.3 Ethernet connector for maintenance

When the front bezel of the magazine operation panel is removed, the Ethernet connector for
maintenance is found inside.
The Ethernet connector for maintenance is used for logging in to the remote management interface
as a user with maintenance personnel authority.
192.0.2.1.)
In the Ethernet connector for maintenance, a remote administration interface can be used like the
Ethernet connector on the back of equipment.
For information about how to remove the front bezel of the magazine operation panel, see
Replacing the Front bezel L
"10.13
(The IP address of the maintenance port is
."
-6-