Quality Assurance And Standards; Statement By The Management; Environment - Salicru EQUINOX EQX2 3001-HSX User Manual

3. QUALITY ASSURANCE AND
STANDARDS.

3.1. STATEMENT BY THE MANAGEMENT.

Our aim is to satisfy our customers. Management has estab-
lished a Quality and Environmental Policy for such purposes.
As a result, a Quality and Environmental Management System
will be implemented, which will ensure that we are compliant
with the requirements of the
ards and that we meet all customer and stakeholder require-
ments.
The company management is also committed to the development
and improvement of the Quality and Environmental Management
System, through:
Company-wide communication regarding the importance
•
of meeting both customer and legal and regulatory require-
ments.
Dissemination of the Quality and Environmental Policy and set-
•
ting of the Quality and Environment targets.
Management reviews.
•
Provision of the necessary resources.
•
3.2. STANDARDS.
The product is designed, manufactured and marketed in accordance
with the ISO 9001 Quality Assurance standard. The
indicates conformity with the EEC Directives through application
of the following standards:
2014/35/EU. - Low voltage directive.
•
2014/30/EU Directive
- Electromagnetic compatibility -CEM-.
•
2011/65/EU. - Restriction of hazardous substances in elec-
•
trical and electronic equipment (RoHS).
2012/19/EU. - Waste electrical and electronic equipment
•
(WEEE).
Grid connection laws in Spain:
Royal Decree RD647/2020, which regulates aspects neces-
•
sary for the implementation of the grid connection codes of
certain electrical installations.
Royal Decree RD244/2019, which regulates the administra-
•
tive, technical and economic conditions of self-consumption of
electrical energy
According to the specifications of the corresponding harmonised
standards. Reference standards:
Electrical safety:
IEC/EN/UNE 62109-1:2010. Safety of power converters for
•
use in photovoltaic power systems. Part 1: General require-
ments.
IEC/EN/UNE 62109-2:2011. Safety of power converters for
•
use in photovoltaic power systems. Part 2: Particular require-
ments for inverters.
USER MANUAL
ISO 9001 ISO 14001
and stand-
mark
Electromagnetic compatibility:
IEC/EN/UNE 61000-6-2:2005. Electromagnetic compat-
•
ibility (EMC). Part 6-2: Generic standards. Immunity in indus-
trial environments.
IEC/EN/UNE 61000-6-3:2007/A1:2011. Electromagnetic
•
compatibility (EMC). Part 6-3: Generic standards. Emission
standard for residential, commercial and light-industrial envi-
ronments.
Efficiency:
IEC/EN/UNE 61683:1999. Photovoltaic systems. Power con-
•
ditioners. Procedure for measuring efficiency.

Environment:

IEC/EN/UNE 60068-2-1:2007 / IEC/EN/UNE 60068-2:2007 /
•
IEC/EN/UNE 60068-14:2009 / IEC/EN/UNE
Environmental tests. Cold/Dry heat/Temperature changes/
Cyclic heat.
Grid connection:
IEC/EN/UNE 62116:2014. Utility-interconnected photovol-
•
taic inverters. Test procedure of islanding prevention meas-
ures.
IEC 61727:2004. Photovoltaic (PV) systems - Characteristics
•
of the utility interface.
Only for installations in Spain :
UNE 217002:2020. Inverters for connection to the distribution
•
network. Testing of requirements for DC grid injection, over-
voltage generation and island operation detection system.
UNE 217001:2020. Tests for systems intended to avoid the
•
energy transmission to the distribution network.
The manufacturer shall not be held responsible for any
damage caused by the user altering or tampering with the
unit in any way.
The EC declaration of conformity for the product is avail-
able for the customer and can be requested from our head
office.
3.3. ENVIRONMENT.
This product has been designed with the protection of the environ-
ment in mind and has been manufactured in accordance with the
ISO 14001
standard.
Recycling the unit at the end of its useful life:
Our company commits to using the services of approved companies
that comply with the regulations in order to process the recovered
product at the end of its useful life (please contact your distributor).
Packaging:
To recycle the packaging, follow the applicable legal regulations,
depending on the particular standards of the country where the
unit is installed.
60068-30:2005.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
59