Annex. Wifi Module Setup - Salicru EQUINOX EQX2 3001-HSX User Manual

10. ANNEX. WIFI MODULE SETUP.

The WiFi module must configured in the router during the first
installation process. If the name or password of the router is
changed, the WiFi password must be configured again.
WiFi module setup.
1.
Start the inverter.
a.
Set the inverter communications to WiFi mode. To do so,
b.
follow the steps of FAQ number 8, as communications are
set to bluetooth mode by default.
Prepare a laptop computer or smartphone and activate the
c.
WLAN/WiFi connection.
Go to screen 8.2.2 SSID to identify the WiFi network name
d.
of the Inverter.
On the laptop or smartphone, search for the WiFi with the
e.
name "WiFi-AP********" and select it to connect.
Open the browser (if it has not opened automatically on
2.
connecting to the WiFi) and type the address 10.10.100.254.
The following screen will be displayed.
Using the Scan button, select the WiFi network you want to
3.
connect to from the available networks. The WiFi module can
only connect to 2.4 GHz networks.
102
In the PASSWORD field, you must enter the password of the
4.
WiFi network you want to connect to.
Once connected, the Connection Succeeded message will
5.
appear and the LED of the inverter's WiFi module will light up
green.