1. Manuals
  2. Brands
  3. Flavor Burst Manuals
  4. Commercial Food Equipment
  5. CTP 44SS-DLX
  6. Instruction manual

Flavor Burst CTP 44SS-DLX Instruction Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Flavor Burst
®
Deluxe Cabinet
- Operations Manual Supplement
Models: CTP 80SS-DLX
CTP 80BLD-DLX
CTP 80BEV-DLX
CTP 80FCB-DLX
CTP 44SS-DLX
CTP 44BLD-DLX
CTP 44BEV-DLX
CTP 44FCB-DLX
CTP 44SS/BEV-DLX
CTP 44SS/BLD-DLX
CTP 44SS/FCB-DLX
CTP 44BEV/BLD-DLX
CTP 44BEV/FCB-DLX
CTP 44BLD/FCB-DLX
SS-DLX
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
For general information and to locate a
distributor near you, call or visit our
website:
Phone: (317) 745-2952
Toll Free Number: (800) 264-3528
Fax: (317) 745-2377
www.flavorburst.com
For pricing, ordering and support, please
contact one of our qualified distributors.
This supplement is not a full operations manual. It does not contain complete
information on installing and maintaining your new system. The purpose of
this manual supplement is to provide you with additional information and
instruction, such as diagrams and part lists, which are either not included or
are different from what is shown in the standard manual. Read through these
installation and maintenance instructions first and then refer to your standard
manual for the rest of the instructions. Be sure to also refer to your standard
model to get complete information needed for your system. All manuals and
supplements are available on
©2016 Flavor Burst Company
All Rights Reserved
PLEASE READ FIRST!
www.flavorburst.com
Printed in October
Printed in
The United States of America

Advertisement

Table of Contents
loading

Related Manuals for Flavor Burst CTP 44SS-DLX

Summary of Contents for Flavor Burst CTP 44SS-DLX

  • Page 1 Be sure to also refer to your standard model to get complete information needed for your system. All manuals and supplements are available on www.flavorburst.com ©2016 Flavor Burst Company Printed in October Printed in All Rights Reserved...
  • Page 2 PAGE INTENTIONALLY LEFT BLANK...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS FCC ID……………………………...………………………………………….………………...3 Introduction……………………………...………………………………………….………….4 Safety Precautions……………………………..…………….………..……..….…………..4 Environmental Notices………………...………………………………………….………….5 Parts Identification/Function……...……………………….……..…..……….……..….…..7 Equipment Setup – “80” Systems …………………………………………..….……..….44 Connecting the Unit Syrup Line and Pump Harness Cable…….………...…..… 44 Installing the Electronics Box and Power Connections……………….…….……..46 Filling the Sanitizer Tank………………………………………….……………..…48 EQUIPMENT SETUP - Continued……………………………….……………..…49 Daily Opening, Daily Closing, Scheduled Maintenance –...

  • Page 4: Fcc Id

    FCC ID 必须要加的警告语: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

  • Page 5: Introduction

    Panel. DO NOT install the unit in an area where Components of the Flavor Burst system should a water jet could be used, and do not use a be cleaned daily to ensure the highest standard water jet to clean or rinse the system. Failure to of sanitation.

  • Page 6: Environmental Notices

    HAZARD COMMUNICATION STANDARD (HCS) – The procedure(s) in this manual NOTE: Access to the service area is restricted to persons having safety / hygiene include the use of chemical products. These knowledge and practical experience of the chemical products will be highlighted in appliance.
  • Page 7 PAGE INTENTIONALLY LEFT BLANK...

  • Page 8: Parts Identification/Function

    General Cabinet Overview (See Figure 1) ITEM PART NO. DESCRIPTION QTY. FUNCTION TOUCH PANEL ASSEMBLY WITH ELE 905A Flavor Burst unit command center. BRACKET ELE 434 POWER CABLE Supplies the electronics board with power. FOR “SS” SYSTEMS: Injects syrups into the product.
  • Page 9 General Cabinet Overview (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION FLAVOR BURST DELUXE Houses inner cabinet assembly. CABINET ASSEMBLY - OUTER FLAVOR BURST DELUXE Houses syrup trays and bags. CABINET ASSEMBLY - INNER CTP-DLX ELECTRONICS BOX Protects the electronics board and connections.
  • Page 10 General Cabinet Overview (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” & “BLD” SYSTEMS: Connects soft serve flavor bag to syrup out tube. *8 for 80SS, 80BLD, 44SS, 44BLD, & 44SS/BLD systems. SYRUP BAG ADAPTER SYR 941A **4 for 44SS/FCB, 44SS/BEV, 44BLD/FCB, & 0*** 44BEV/BLD systems.
  • Page 11 General Cabinet Overview 26000 “FCB” SYSTEMS “BEV” SYSTEMS “BLD” SYSTEMS “SS” SYSTEMS “SS” AND “BLD” SYSTEMS “SS” AND “BLD” SYSTEMS 10-1 “SS” AND “BLD” SYSTEMS “BEV” AND “FCB” SYSTEMS 10-2 “SS” SYSTEMS 16-1 “BLD” SYSTEMS 16-2 16-3 “BEV” SYSTEMS 16-4 “FCB”...
  • Page 12 Allows access to pumps. CAB 235R CABINET RIGHT SIDE PANEL Covers right side of inner cabinet. MIS 3150 FLAVOR BURST LOGO DECAL Displays Flavor Burst trademark logo. FAS 2024 8-32 X 1/4 PAN HEAD SCREW Secures back panel to base.
  • Page 13 Outer Cabinet 26001 See Figure 5 Electronics Parts and Connections See Figure 3 Inner Cabinet Figure 2...
  • Page 14 Inner Cabinet (See Figure 3) ITEM PART NO. DESCRIPTION QTY. FUNCTION CAB 201 SYRUP RACK COVER PANEL Keeps side and inner panels stable. CAB 204L SYRUP RACK LEFT PANEL Holds outer syrup rails. FOR “SS” and “BLD” SYSTEMS: Transports syrup from the bag to pumps. *8 for 80SS, 80BLD, 44SS, 44BLD, &...
  • Page 15 Inner Cabinet (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION Attaches the bottom of the inner and side CAB 233 SYRUP RACK BASE PANEL panels. CAB 204R SYRUP RACK RIGHT PANEL Holds outer syrup rails. Fastens pump brackets and pumps and FAS 2024 8-32 X 1/4"...
  • Page 16 PAGE INTENTIONALLY LEFT BLANK...
  • Page 17 Inner Cabinet 26002 “SS” & “BLD” SYSTEMS 18-1 18-2 “BEV” & “FCB” SYSTEMS 16-1 “80” SYSTEMS 16-2 “44” SYSTEMS FOR 80 SYSTEMS 20-1 FOR 44 SYSTEMS 20-2 80SS, 80BLD, 44SS, 44BLD, 44SS/BLD, 44SS/BEV, 80FCB, 44FCB, 44SS/FCB, 44BEV/BLD, & 44SS/BEV, 44SS/FCB, 44BLD/FCB MODELS 80BEV, 44BEV, &...
  • Page 18 “SS” Injector Assembly and Related Parts (See Figure 4A) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” SYSTEMS: Injects syrups into the product. *1 for 80SS, 44SS/BLD, 44SS/BEV, & INJECTOR ASSEMBLY WITH SYRUP 44SS/FCB systems. INJ 424TS LINES, ADAPTER, & BRACKET **2 for 44SS systems.
  • Page 19 “SS” Injector Assembly and Related Parts (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION INJ 323TS INJECTOR ASSEMBLY - NO HEAD Powers Injector system. INJ 330TS INJECTOR MOTOR ASSEMBLY 1 ea. Supplies power to Motor which turns gears. Gears turn Gear Cartridge for even syrup INJ 331 INJECTOR GEARBOX ASSEMBLY 1 ea.
  • Page 20 “BLD” Blending Assembly and Related Parts (See Figure 4B) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BLD” SYSTEMS: Blends syrups into the product. *1 for 80BLD, 44SS/BLD, 44BLD/FCB, & FLAVOR BLEND BLENDING 44BEV/BLD systems. INJ 424VBLD ASSEMBLY WITH SYRUP LINES, **2 for 44BLD systems.
  • Page 21 “BLD” Blending Assembly and Related Parts (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION SUSPENSION BRACKET MIS 3143 Secures Blending Assembly to freezer door. ASSEMBLY FAS 2107 BLENDING BRACKET KNOB 1 ea. Secures the two bracket pieces. Attaches to freezer door bolts to hang MIS 3143A SUSPENSION BRACKET PART A 1 ea.
  • Page 22 “BEV” Blending Assembly and Related Parts (See Figure 4C) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BEV” SYSTEMS: Blends syrups into the product. *1 for 80BEV, 44SS/BEV, 44BEV/BLD, & VERTICAL BLENDING ASSEMBLY 44BEV/FCB systems. INJ 424VTS WITH SYRUP LINES, ADAPTER, & **2 for 44BEV systems.
  • Page 23 “BEV” Blending Assembly and Related Parts (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION INJ 323TS BLENDING ASSEMBLY - NO HEAD Powers Blending system. HIGH SPEED BLENDING MOTOR INJ 330HSB 1 ea. Powers Blending system. ASSEMBLY Gears turn Gear Cartridge for even syrup INJ 331 BLENDING GEARBOX ASSEMBLY 1 ea.
  • Page 24 “FCB” Door Spout Assembly and Related Parts (See Figure 4D) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “FBC” SYSTEMS: Dispenses product blended with syrups. *1 for 80FCB, 44SS/FCB, 44BEV/FCB, & ADPT MODIFIED FCB FREEZER SPOUT 44BLD/FCB systems. TY80S-FCB ASSEMBLY **2 for 44FCB systems. 0*** ***0 for 80SS, 80BEV, 80BLD, 44BLD, 44BEV, 44SS, 44BEV/BLD, 44SS/BEV &...
  • Page 25 “FCB” Door Spout Assembly and Related Parts 26003D FOR “FCB” SYSTEMS Figure 4D...
  • Page 26 Soft Serve Syrup Pump and Related Parts (See Figure 5A) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” & “BLD” SYSTEMS: Pumps syrup from flavor bags into flavor lines. *8 for 80SS, 80BLD, 44SS, 44BLD, & SOFT SERVE SYRUP PUMP 44SS/BLD systems.
  • Page 27 Soft Serve Syrup Pump and Related Parts 26004A “80” SYSTEMS “44” SYSTEMS Figure 5A...
  • Page 28 Beverage Syrup Pump and Related Parts (See Figure 5B) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BEV” & “FCB” SYSTEMS: Pumps syrup from flavor bags to flavor lines. *8 for 80BEV, 80FCB, 44BEV, 44FCB, & BEVERAGE SYRUP PUMP 44BEV/FCB systems. SYSTEM **4 for 44SS/FCB, 44SS/BEV, 0***...
  • Page 29 Beverage Syrup Pump and Related Parts 26004B “80” SYSTEMS “44” SYSTEMS Figure 5B...
  • Page 30 Sanitizer Pump and Related Parts (See Figure 6) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” and “BLD” SYSTEMS: Flushes flavor lines with sanitizer when attached. *1 for 80SS, 80BLD, 44SS, 44BLD, MIS 3028- SANITIZER FLUSH TUBE 44SS/BLD, 44SS/BEV, 44SS/FCB, ASSEMBLY –...
  • Page 31 Sanitizer Pump and Related Parts (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION Connects sanitizer line to barb fitment. FIX 1036 UNION-ELBOW-1/4X1/4OD FB80 *0 for 80FCB & 44FCB systems. SYR 900 4’ 9-TUBE ASSEMBLY TUBES Transports sanitizer from the tank the pump. Transports sanitizer to sanitizer / flush tubes.
  • Page 32 Syrup Tray, Sanitizer Tank, 9-Tube Assembly Leads, and Casing (See Figure 7) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “80” SYSTEMS: Transports syrup from bags to the 9-Tube Assembly. SYR 927 INTERNAL 9-TUBE ASSEMBLY *1 for “80” systems. **0 for “44” systems. Transports syrup and sanitizer from SYR 900 4' 9-TUBE ASSEMBLY TUBES...
  • Page 33 Syrup Tray, Sanitizer Tank, 9-Tube Assembly Leads, and Casing (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION SAN 756 SANITIZER TANK ASSEMBLY Houses sanitizer cleaning solution. SAN 749 THREADED CHECK VALVE 1 ea. Allows air to fill Sanitizer Tank. SAN 750 SANITIZER TANK DOME NUTS 1 ea.
  • Page 34 PAGE INTENTIONALLY LEFT BLANK...
  • Page 35 Syrup Tray, Sanitizer Tank, 9-Tube Assembly Leads, and Casing 26008 FOR “80” SYSTEMS FOR “44” SYSTEMS PUMPS PUMPS & DIVERTER VALVE EXTENSION FOR “44” SYSTEMS Figure 7...
  • Page 36 Electronic Parts and Connections (See Figure 8) ITEM PART NO. DESCRIPTION QTY. FUNCTION ELE 905 FLAVOR 10 COLOR TOUCH PANEL Control system for the unit. FOR “SS” & “BLD” SYSTEMS: Secures the Touch Panel to the freezer. *1 for 80SS, 80BLD, 44SS, 44BLD, TOUCH PANEL MOUNTING BRACKET MIS 3214 44SS/BLD, 44SS/BEV, 44SS/FCB,...
  • Page 37 Electronic Parts and Connections (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” & “BLD” SYSTEMS: Sends a wireless signal to the Touch Panel when the freezer draw handle is activated. *1 for 80SS, 80BLD, 44SS/BLD, 44SS/BEV, ELE 924 WIRELESS SPIGOT SWITCH 44SS/FCB, 44BLD/FCB, &...
  • Page 38 Electronic Parts and Connections (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION ELE 911 ELECTRONICS BOARD Provides power to the system. FAS 2024 8-32 X 1/4 PAN HEAD SCREW Secures power supply to the base panel. 8-32 NUTS - EXT. LOCK Secures Electronics Board to the Box and the FAS 2035 WASHER...
  • Page 39 Electronic Parts and Connections 26006 “SS” SYSTEMS “BLD” & 14-1 “BEV” SYSTEMS 11-1 14-2 11-2 Figure 8...
  • Page 40 “SS” Spare Parts Kit (See Figure 9A) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” SYSTEMS: Houses extra spare parts and wear items. *1 for 80SS, 44SS, 44SS/BLD, 44SS/FCB, & SPR 5800A SPARE PARTS KIT – SOFT SERVE 44SS/BEV systems. **0 for 80BLD, 80BEV, 80FCB, 44BLD, 44BEV, 44FCB, 44BLD/FCB, 44BEV/BLD, &...
  • Page 41 “BLD” Spare Parts Kit (See Figure 9B) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BLD” SYSTEMS: Houses extra spare parts and wear items. *1 for 80BLD, 44BLD, 44SS/BLD, SPARE PARTS KIT – SOFT SERVE SPR 5800BLD 44BLD/FCB, & 44BEV/BLD systems. BLEND **0 for 80SS, 80BEV, 80FCB, 44SS, 44BEV, 44FCB, 44SS/FCB, 44SS/BEV, &...
  • Page 42 “BEV” Spare Parts Kit (See Figure 9C) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BEV” SYSTEMS: Houses extra spare parts and wear items. *1 for 80BEV, 44BEV, 44SS/BEV, 44BEV/BLD, & SPARE PARTS KIT – SPR 5800BEV 44BEV/FCB systems. TOUCHSCREEN BEVERAGE **0 for 80SS, 80BLD, 80FCB, 44SS, 44BLD, 44FCB, 44SS/FCB, 44SS/BLD, &...
  • Page 43 “FCB” Spare Parts Kit (See Figure 9D) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “FCB” SYSTEMS: Houses extra spare parts and wear items. *1 for 80FCB, 44FCB, 44SS/FCB, SPR 5800FCB SPARE PARTS KIT FOR FCB 44BLD/FCB, & 44BEV/FCB systems. **0 for 80SS, 80BEV, 80BLD, 44SS, 44BEV, 44BLD, 44SS/BLD, 44SS/BEV, &...
  • Page 44 PAGE INTENTIONALLY LEFT BLANK...

  • Page 45: Equipment Setup - "80" Systems

    Connecting the Unit Syrup Line and Pump EQUIPMENT SETUP - “80” SYSTEMS Harness Cable NOTE: YOUR HANDS SHOULD BE CLEANED The syrup lines attached at the lower back of AND SANITIZED BEFORE YOU PERFORM the cabinet connect the 8 bags of syrup to the THE FOLLOWING PROCEDURES.
  • Page 46 4. Loosen the Lead’s coupler nut and slide the 7. Thread the 9-Tube Assembly coupler nut connection onto the slot on the lower plate. onto the Lead’s casing and tighten to secure. 26235 26233 5. Tighten the coupler nut and the casing to secure.

  • Page 47: Installing The Electronics Box And Power Connections

    Installing the Electronics Box and Power 4. Remove the open-close bushing from the Connections plate and wrap the bushing around the pump harness cable, leaving enough cable The Electronics Box houses the electronics to connect the end to the Electronics Board. board and most of the power connections for Snap the grommet with the cable back into the Deluxe unit.
  • Page 48 8. Ensure the power-switch is in the “off” 12. Use the four screws of the Electronics Box ○ to mount the box to the back panel of the position with the “ ” end pressed in on the Deluxe Cabinet. The Electronics Box needs Electronics Box Power Entrance Module.

  • Page 49: Filling The Sanitizer Tank

    16. Ensure the Color Touch Panel is installed Filling the Sanitizer Tank and mounted according to instructions in your full Operations Manual. Then, turn on The Sanitizer Tank system provides approved the Touch Panel by pressing the small sanitizer solution to specific areas of the Flavor round black power button on the back Burst system such as the Injector Head and casing of the Touch Panel.

  • Page 50: Equipment Setup - Continued

    4. Set the Sanitizer Tank upright and remove EQUIPMENT SETUP – Continued the cap. Continue with the EQUIPMENT SETUP instructions in your standard operations manual(s). For systems flavoring two different product types, refer to each type of manual for setup on that freezer. For example, to install the Spigot Switch on a freezer striping soft serve product, refer to the CTP 80SS manual.

  • Page 51: Daily Opening, Daily Closing, Scheduled Maintenance - Notes For "44" Systems

    Daily Opening, Daily Closing, Scheduled DAILY OPENING, DAILY CLOSING, Maintenance for Models: SCHEDULED MAINTENANCE CTP 44SS/FCB – NOTES FOR “44” SYSTEMS CTP 44BLD/FCB CTP 44BEV/FCB NOTE: YOUR HANDS SHOULD BE CLEANED For models with one side flavoring Frozen AND SANITIZED BEFORE YOU PERFORM Carbonated Beverages, the “FCB”...

  • Page 52: Comparing The Injector And Blending Assemblies

    Comparing the Injector and Blending 2. The Gear Cartridge is the part that Assemblies combines the flavoring with the product. Each one is designed to mix the flavoring with a specific product. Be sure to install 26100 the correct cartridge with its assembly for best results.
  • Page 53 3. The difference between the Drive Motors is 4. The soft serve and blend assemblies each in the speed of the motor and the direction come with two spout adapters, which fit the motor turns the small white gear at the most soft serve freezers.
  • Page 54 5. The lower o-rings of all three adapters are all the same – RUB 632. The beverage adapter comes with an additional o-ring that fits inside the adapter along the top. It is noticeably larger than the lower o-ring. SS & BLD Soft Serve &...

  • Page 55: Replacing The Syrup Flavors - Notes For "44" Systems

    Flavor Burst system they are installed in. Color intensity, flavor intensity, and whether or not they blend with the product vary from each type.
  • Page 56 3. Soft Serve Striping Syrups: There are two different kinds of soft serve syrup. One (Flavor Burst) is formulated to stripe the soft serve and is compatible with the “SS” model systems. The flavor part numbers for these syrups either end in a number or “SEA”.

  • Page 57: Equipment Setup - "44" Systems

    Installing the Spout Adapters - Notes EQUIPMENT SETUP – “44” SYSTEMS 1. The soft serve and blend assemblies each come with two spout adapters, which fit NOTE: YOUR HANDS SHOULD BE CLEANED most soft serve freezers. The frozen AND SANITIZED BEFORE YOU PERFORM beverage flavoring assembly comes with THE FOLLOWING PROCEDURES.

  • Page 58: Installing The Touch Panel And Mounting Bracket - Notes

    Color Touch Panel is typically The Color Touch Panel is the control unit for the mounted in between the two freezer. If this Flavor Burst system. Normal operating is not possible, mount the panel on the ®...

  • Page 59: Installing The Spigot Switches - Notes

    Installing the Spigot Switches - Notes Connecting the Unit Syrup Lines and Pump Harness Cable When connecting two switches on the Color Touch Panel switch ports, it does not matter The syrup line Lead “A” at the lower back of the which port goes with each switch.
  • Page 60 5. Remove the dust cap of the Lead that will 9. Removed the dust cab from the other end of require the Extension. Slide the coupler the 9-Tube Extension. Slide the coupler casing toward the unit to expose the Lead casing back to expose the Extension line coupler.
  • Page 61 12. Slide the coupler casing over the connection 15. Align the coupler pins of the Lead with the and screw each coupler nut into each end of appropriate 9-Tube Assembly coupler pins the casing. Tighten the coupler nuts to and connect the assemblies. secure the connection.

  • Page 62: Filling The Sanitizer Tank

    Sanitizer Tank. The tank system delivers solution to specific areas of the ® Flavor Burst system such as the spout assembly and syrup lines during certain functions. In order to utilize these clean-in-...

  • Page 63: Installing The Electronics Box And Power Connections

    Installing the Electronics Box and Power 2. Remove the two screw from the cover plate Connections and gently pull the plate away from the Electronics Box. Leave the Rotor Cable The Electronics Box houses the electronics connected to the board. board and most of the power connections for 26213mx the Deluxe unit.
  • Page 64 5. Reinstall the cover plate to the Electronics 8. Find the Drive Motor cable that is attached Box. to your first spout (or Spout 1), the one that will operate flavors in trays 1-4. Connect 26216mx this motor cable to the round metal port on the back of the unit labeled “1”.
  • Page 65 11. Connect the power cord to the port on the 15. Activate the unit by pressing the “|” end of back panel. the switch. 26222mx 26223mx 12. Use the four screws of the Electronics Box 16. Turn on the Touch Panel by pressing the to mount the box to the back panel of the small round black power button on the back Deluxe Cabinet.

  • Page 66: Installing Flavors And Priming Syrup Lines - Notes

    3. Soft Serve Striping Syrups: There are two Notes different kinds of soft serve syrup. One (Flavor Burst) is formulated to stripe the soft Each flavor for the Dual Series system is stored serve and is compatible with the “SS” model inside a numbered syrup tray within the system systems.

  • Page 67: Color Touch Panel Overview - Notes For "44" Systems

    COLOR TOUCH PANEL OVERVIEW – NOTES FOR “44” SYSTEMS More than one flavor can be selected for each serving. Simply select the Touch Panel flavors desired in the single serving and draw the Nearly all instructions involving the Touch product as usual. The flavors will dispense in Panel, setup and operational, are outlined on one smooth motion, changing in the order the Touch Panel itself.

  • Page 68: Testing The Drive Motor And Switch Connections

    Testing the Drive Motor and Switch 4. Go to the Color Touch Panel’s Connections “Maintenance Menu” and go through the Equipment Setup Wizard. On “Step 4” of the Equipment Setup Wizard, assign a spout to Test the system to ensure the Color Touch the injector connectors C and D on the Panel is set up to operate each flavoring board.

  • Page 69: Testing The Syrup Connections

    Testing the Syrup Connections Testing the syrup connections ensures that the first four flavors are connected to the correct spout. If the Equipment Setup Wizard is not set up correctly or if the 9-Tube Assemblies are not connected to the correct Leads at the back of the unit, you may have the wrong set of four syrups connected to the spouts.
  • Page 70 PAGE INTENTIONALLY LEFT BLANK...

  • Page 71: Other Important Information

    OTHER IMPORTANT INFORMATION Consult your standard manual for important information and instructions on these topics:  Daily Opening Procedures  Daily Closing Procedures  Replacing the Syrup Flavors  Scheduled Maintenance  Color Touch Panel Overview  Directory of Cleaning Procedures ...

  • Page 72: Ordering/Service Information

    For more information, contact your local authorized Flavor Burst ® distributor. Flavor Burst is a registered trademark of the Flavor Burst Company. Taylor is a registered trademark of the Taylor Company. All rights reserved.

This manual is also suitable for:

Ctp 80bld-dlxCtp 80bev-dlxCtp 80fcb-dlxCtp 80ss-dlxCtp 44bld-dlxCtp 44bev-dlx ... Show all

Table of Contents