Table of Contents
Advertisement
Quick Links
Flavor Burst
®
16 Flavor Expansion Base-1S
- Operations Manual Supplement
Models: CTP BASE SS-1S
CTP BASE BLD-1S
CTP BASE BEV-1S
CTP BASE CBB-1S
Manufactured by
Flavor Burst Company
499 Commerce Drive
Danville, IN 46122
For general information and to locate a
distributor near you, call or visit our website:
Phone: (317) 745-2952
Toll Free Number: (800) 264-3528
Fax: (317) 745-2377
www.flavorburst.com
For pricing, ordering and support, contact one
of our qualified distributors.
This supplement is not a full operations manual. It does not contain complete
information on installing and maintaining your new system. The purpose of this
manual supplement is to provide you with additional information and instruction,
such as diagrams and part lists, which are either not included or are different
from what is shown in the standard manual. Read through these installation and
maintenance instructions first and then refer to your standard manual for the rest
of the instructions. Be sure to also refer to your standard model to get complete
information needed for your system.
All manuals and supplements are available on
©2021 Flavor Burst Company
All Rights Reserved
PLEASE READ FIRST!
Printed in October
www.flavorburst.com
Printed in
The United States of America
Advertisement
Table of Contents
Related Manuals for Flavor Burst CTP BASE SS-1S
Summary of Contents for Flavor Burst CTP BASE SS-1S
- Page 1 Flavor Burst ® 16 Flavor Expansion Base-1S - Operations Manual Supplement Models: CTP BASE SS-1S CTP BASE BLD-1S CTP BASE BEV-1S CTP BASE CBB-1S Manufactured by Flavor Burst Company 499 Commerce Drive Danville, IN 46122 For general information and to locate a...
- Page 2 PAGE INTENTIONALLY LEFT BLANK...
-
Page 3: Table Of Contents
TABLE OF CONTENTS FCC Conformity Statement…..………………………………………….………………………...3 Introduction……………………………...………………………………………………….………….4 Safety Precautions……………………………..…………….………..…………….….…………..4 Environmental Notices………………...………………………………………….………………….5 Parts Identification/Function……...……………………….……..…..……….……..….…………..7 Equipment Setup……………………………….…….…..…………………...………..……...24 Installing the Sanitizer Line – External Tank…………..………………..…….…………….24 Installing the Sanitizer Line – Internal Tank……...………………………………...……….25 Connecting the Pump Harness Cable….……….…………….……………..………..…...27 Connecting to a Standard Cabinet………………………….………………………..27 Connecting to a Deluxe Cabinet………………………………….…………………..28 Connecting to an Integrated Cabinet………………………………….………..……29 Installing the Injector / Blending Head and 9-Tube Assemblies…...…………….…….…30 Continuing Equipment Setup……………………………………..………………………..…30... -
Page 4: Fcc Conformity Statement
FCC ID Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -
Page 5: Introduction
Failure to follow this instruction may base product as it is dispensed. Dispensing result in contaminated product or personal Flavor Burst product is very simple. Select the injury from blade contact. flavor(s) from the screen and draw the product. -
Page 6: Environmental Notices
HAZARD COMMUNICATION STANDARD (HCS) – The procedure(s) in this manual NOTE: Access to the service area is restricted to persons having safety / hygiene include the use of chemical products. These knowledge and practical experience of the chemical products will be highlighted in appliance. - Page 7 PAGE INTENTIONALLY LEFT BLANK...
-
Page 8: Parts Identification/Function
*8 for BEV-1S systems. **0 for SS-1S, BLD-1S, & CBB-1S systems. STAINLESS TUBE / CABLE Attaches the flavor lines and/or cables to the MIS 3196 CASING ASSEMBLY side of the freezer. FLAVOR BURST SOFT SERVE Houses syrup trays and bags. CABINET ASSEMBLY... - Page 9 General System Overview Figure 1...
- Page 10 Cabinet – (See Figure 2) ITEM PART NO. DESCRIPTION QTY. FUNCTION ELECTRONICS SYSTEM Houses microprocessor and electronics. Holds tray support brackets and panel CAB 135R-A RIGHT SIDE PANEL brackets. CAB 145 TRAY SUPPORT BRACKET Supports flavoring trays. Fastens panel brackets to divider panel, FAS 2024 8-32 X 1/4 PAN HEAD secures sides.
- Page 11 Cabinet (Continued) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” & “BLD” SYSTEMS: Pumps syrup from flavor bags into flavor PERISTALTIC SYRUP PUMP – 20-1 SYR 307 lines. SOFT SERVE *8 for SS-1S & BLD-1S systems. **0 for BEV-1S & CBB-1S systems. OR…...
- Page 12 PAGE INTENTIONALLY LEFT BLANK...
- Page 13 Cabinet Figure 2...
- Page 14 Injector /Blending Assembly and Related Parts (See Figure 3A) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” SYSTEMS: Connects flavor line INJECTOR HEAD ASSEMBLY WITH to inject syrups into product. 1-1 INJ 422-DH DOUBLE SYRUP PORTS *1 for SS-1S systems. **0 for BLD-1S, BEV-1S, &...
- Page 15 Injector /Blending Assembly and Related Parts (Continued) Figure 3A...
- Page 16 Soft Serve Syrup Pump and Related Parts (See Figure 4A) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS” & “BLD” SYSTEMS: Pumps syrup from flavor bags into flavor SOFT SERVE SYRUP PUMP lines. SYSTEM *8 for SS-1S & BLD-1S systems. **0 for BEV-1S &...
- Page 17 Soft Serve Syrup Pump and Related Parts Figure 4A...
- Page 18 Beverage Syrup Pump and Related Parts (See Figure 4B) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “BEV” SYSTEMS: Pumps syrup from flavor bags into flavor BEVERAGE SYRUP PUMP lines. SYSTEM *8 for BEV-1S systems. **0 for SS-1S, BLD-1S & CBB-1S systems.
- Page 19 Beverage Syrup Pump and Related Parts Figure 4B...
- Page 20 Premium Beverage Syrup Pump and Related Parts (See Figure 4C) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “CBB” SYSTEMS: Pumps syrup from flavor bags into flavor PREMIUM BEVERAGE SYRUP lines. PUMP SYSTEM *8 for CBB-1S systems. **0 for SS-1S, BEV-1S & BLD-1S systems.
- Page 21 Soft Serve Syrup Pump and Related Parts Figure 4C...
- Page 22 Sanitizer Pump and Related Parts (See Figure 5) ITEM PART NO. DESCRIPTION QTY. FUNCTION FOR “SS”, “BLD”, “CBB” SYSTEMS: Connects with flavor line to flush with FLUSH TUBE ASSEMBLY – SOFT 1-1 MIS 3028-80 sanitizer solution. SERVE *1 for SS-1S, BLD-1S, & CBB-1S systems. **0 for BEV-1S systems.
- Page 23 Sanitizer Pump and Related Parts Figure 5...
- Page 24 Secures various parts within the top of the FAS 2014 8-32 X 1/2" PAN HEAD unit. MIS 3150 FLAVOR BURST LOGO DECALS Displays Flavor Burst trademark logo. Protects power cables from liquids; CAB 156 CONNECTOR SHIELD splash guard. POWER ENTRANCE MODULE CAB 485C Covers the opening in the cabinet panel.
-
Page 25: Equipment Setup
PROPER PREPARATIONS OF THIS CLEANING AGENT. NOTE: INSPECT ALL WEAR ITEMS AND REPLACE IF NECESSARY. Combined with your existing Flavor Burst system, the Base-1S unit turns your 8-flavor 3. Insert the Base-1S sanitizer line into the system into a 16-flavor system. The BASE-1S remaining T-Connector opening. -
Page 26: Installing The Sanitizer Line - Internal Tank
5. Ensure the sanitizer tank is filled with 2. Place a single service towel under the approved sanitizer solution. pump, and remove the elbow connector that connects the sanitizer tank to the pump. 26391 (To the (To the Sanitizer 9-Tube Tank) Assembly) 6. - Page 27 5. If you are working with an Integrated unit, 8. Return the cabinet panel(s) to the unit. thread the Base-1S sanitizer line through 26398 the same channels as the 9-Tube Assembly. Then proceed to Step 10. 26394 9. Install the Electronics Board back inside the Integrated cabinet, but leave the back panel 6.
-
Page 28: Connecting The Pump Harness Cable
26368 Color Touch Panel or power source. It is designed to connect to the electronics board of your full Flavor Burst system and is controlled by your existing Color Touch Panel. Since the electronics panel is located in different areas... -
Page 29: Connecting To A Deluxe Cabinet
6. Return the cap to the cabinet. 4. Insert the Base unit’s pump harness cable through the opening at the bottom of the 26372 Electronics Box, and then through slotted hole of the plate. 26376 Connecting to a Deluxe Cabinet 5. -
Page 30: Connecting To An Integrated Cabinet
Connecting to an Integrated Cabinet 5. Insert the pump harness cable connector The Integrated unit’s Electronics Board is just into the port on the Electronics Board inside the Taylor Cart, behind the back panel. labeled “BANK B” or “PWRCONN3” on the Electronics Board. -
Page 31: Installing The Injector / Blending Head And 9-Tube Assemblies
1. Use the CTP 80SS Operations Manual if 2. Use the included dual-spout Injector / you are serving “striped” soft serve and Blending Head instead of your standard using the CTP BASE SS-1S system. single-spout Head. 26025 2. Use the CTP 80BLD Operations Manual if you are serving “blended”... -
Page 32: Ordering/Service Information
For more information, contact your local authorized Flavor Burst ® distributor. Flavor Burst is a registered trademark of the Flavor Burst Company. Taylor is a registered trademark of the Taylor Company. All rights reserved.