StarTech.com CABCONS1716I User Manual page 62

After resync, the mouse pointers are still not aligned
Use the video adjust menu to position your video image exactly where re-
quired. Normally, a slight video positioning error is perceived as a mouse
sync issue. A video positioning error is visible as a black line along the top
or bottom (and right or left) edges of the remote screen. Remember to
save your position changes!
Cannot login via SSH
Remember to use either admin or a username created in the system as
the user name you give your SSH client.
If you see a warning about identity of host cannot be verified, and a
question about saving the host's fingerprint, this is normal for the first time
you connect to any machine running SSH.You should answer yes so that
your SSH client saves the public key of this host and doesn't re-issue this
warning.
Certificate warning shown when connecting via HTTPS
It is normal for a warning dialog to be shown when connecting via HTTPS.
The SSL certificate CABCONS1716I uses is created when the unit is
first produced. It does not contain the correct hostname (subject name)
because you can change the hostname as required. Also, it is not signed
by a recognized certificate authority (CA) but is signed by our own signing
authority.
Mouse performance is erratic when using the GNOME or KDE desk-
top in a Linux X-Window environment
The mouse controls in GNOME and KDE environments offer both an
acceleration and sensitivity setting. The following directions correct this
issue, and apply to Red Hat Fedora Core 2, but should be similar for other
distributions that use GNOME or KDE:
1. Click the Launch menu icon.
2. Choose Preferences > Mouse.
3. Click the Motion tab.
4. Set the Acceleration bar to the setting immediately left of center.
5. Set the Sensitivity bar to the leftmost settings (lowest possible)
Instruction Manual
57