StarTech.com CABCONS1716I User Manual page 39

Instruction Manual
If the system cannot find the test pattern on the screen, check that the
pattern isn't scaled or covered up. (perform this operation in 24-bit or
32-bit color video mode (i.e. truecolor). Although the algorithm may work
in 16-bit or 8-bit color video modes, the results will not be optimum and
usually it won't be able to recognize the test pattern.
Pressing the Advanced button will open the Advanced Video Tuning
menu. While the vast majority of users will not need to adjust these set-
tings, it offers added control of the video settings of your VNC sessions.
Sampling Phase does not normally need to be used since CAB-
CONS1716I tunes the sampling phase whenever the video mode
changes. This button does not require a test pattern, but will perform
optimally when used with our standard test pattern. For your reference,
the sampling phase number is shown to the right of the Filtering button.
Noise Filter controls the advanced video filtering of our system. Unlike
other filtering algorithms, our noise filter will only remove noise. It does
not degrade the signal quality or readability of small text.You may turn it
on and off using the indicated button, or set it to other values using the ar-
rows. Higher numbers cause more filtering and may cause artifacts when
moving windows. The most common visual artifact is a vertical line drop-
ping when moving windows horizontally.You may use the Redraw button
to correct these, or use a lower filter number. At minimum, these values
must be greater than two.
34