Osd Operations - StarTech.com CABCONS1716I User Manual

OSD Operations

By hitting the left <CTRL> key twice within two seconds, you may see
the 'Hotkey Menu' if it is enabled (an OSD option). Or, by hitting the left
<CTRL> key three times within two seconds, you will see a KVM MENU
screen (below) showing a list of the computers with corresponding chan-
nel addresses, names and status.
The port number (or channel address) of the currently selected
computer is displayed in red in the top right of the screen.
The device name is green if the device has power and is ready for
selection or white if it has no power. The OSD menu automatically
updates the color when it is activated
Use the <UP> and <DOWN> arrow keys to highlight a computer and
the <ENTER> key to select it.
Press <ESCAPE> to exit the OSD menu and remove the OSD menu
from the screen.
A triangle mark on the right side of the screen indicates the port is
cascaded to a Slave KVM; the number at the left of the triangle mark
shows the number of ports the Slave has.With that port highlighted,
press <ENTER> to brings up a screen listing the computers connected
to that Slave. The name of the Slave KVM will be shown at the upper
right corner of the OSD menu.
An eye mark on the right side of the screen indicates that the computer
has been selected to be monitored in Scan mode.You can switch this
mark on and off using function key <F2>.
Press <ESCAPE> to exit the OSD and to return to using the selected
computer.
The computer name is shown on the screen.
Instruction Manual
36