Web Configuration Using Dhcp - StarTech.com CABCONS1716I User Manual

Instruction Manual
If static IP addresses are assigned, you will likely need to change the
Net Mask, IP Address and other details, prior to connecting via your Web
browser. If this is the case, connect a local PS/2 keyboard and press the
Enter key. In order to proceed, you will require an administrative user-
name and password. By default, the username and password are admin.
You will be given the opportunity to change the password (recommended)
to be performed once the configuration is complete.
Alternatively, you may press the Setup button on the front panel, and you
will not be asked to enter the admin password if you just press Enter.
At the main OSD menu (pictured below), you will be given several basic
setup options. To configure CABCONS1716I to your required network set-
tings, use the Network Setup Wizard. To select from the menus provided,
use the arrow keys on your keyboard.
This method requires that your network implement DHCP (Dynamic Host
Configuration Protocol), usually on a server or network access device
such as a router that dynamically allows devices to join the network with-
out pre-configuration.
It also assumes that you will have easy access to your network's DHCP
12