Accessing The Web Interface - StarTech.com CABCONS1716I User Manual

7. Select Connect using a dial-up modem, then click Next.
8. In the space provided under ISP Name, type an appropriate name of
your choosing for the connection. Click Next.
9. In the space provided under
for the line to which the CABCONS1716I's modem is connected. You
may need to add the area code, country code, or other digits needed
to access the outside line as appropriate. When finished, click Next.
10. Make your choice from
Next.
11. Beside User name, enter the user name of any valid user created
using the Web interface of the CABCONS1716I. Beside Password
and Confirm password, enter the password that corresponds with
the username entered.
12. This screen also includes three checkboxes.
checkboxes.
13. Click Next.
14. You may select to add a shortcut to the desktop for this connection.
Click Finish.
PPP (Point-to-Point Protocol) must be used; no other authentication
methods are supported.
TCP/IP must be installed/enabled on the computer making the
connection, and must be used for the dial-up connection.
The connection must be configured to obtain a dynamic IP address.
The user name/password must match a user currently configured on
the CABCONS1716I.
For best performance and to simplify the troubleshooting process,
firewall software should not be used with the dial-up connection.

Accessing the Web Interface

Once a dial-up connection has been established, you can access the
Web interface or start a VNC session using the following IP address:
Instruction Manual
Phone Number enter the phone number
Anyone's use or My use only and click
https://99.99.99.99
Uncheck all 3
48