Overview - YASKAWA VS mini V7 User Manual

1

Overview

The SI-T/V7 Interface Unit is an interface unit that connects to the high-speed
MECHATROLINK-I or MECHATROLINK-II high-speed field network for communicating
with the host controller.
By installing the SI-T/V7 Unit to a VS-606V7-series Inverter, various applications are enabled;
monitoring of the run/stop status and the operating conditions as well as the changing and the
referencing of the settings for the Inverter constants from the host controller.
The SI-T/V7 Unit can be installed in the following Inverters.
VS-606V7 Inverter with an SI-T/V7 Unit does not conform to CE Marking, although the VS-606V7
IMPORTANT
Inverter itself conforms to CE Marking.
• VS-606V7-series Inverters, software version No. 565X.
• VS-606V7-series Inverters, software version No. 573X.
Note: 1. "X" indicates the design revision order.
2. Version No. 573X will replace No. 5650.
3. The Inverter constant cannot be copied from version No.5650 to
No.573X with the Inverter constant copy function if using a Digital
Operator.
9
1 Overview