Table 5 SEL MON1/2 Selection Range
REF1/2
0
Nothing selected.
1
Output frequency
According to n035.
2
Torque reference (U-08): 0.1 %
Given only for vector control.
3
Not used.
4
Frequency reference (U-01)
According to n035.
5
Pulse train reference RP: 0.1 %
6
Main circuit current voltage: 1 V
7
Inverter alarm
8
Inverter warning
9
Not used.
A
Not used.
B
INV terminal DI input
Bits 0 to 7: Terminals S1 to S7
C
INV analog input FR: 0.1 %
D
Not used.
E, F
Not used.
In the following case, a warning is generated and the command is ignored.
• If not in phase 2 or 3: Command fault (A.95)
Item
Refer to the Inverter alarm code list.
Refer to the Inverter warning code list.
Always 0.
35
7 MECHATROLINK-II Commands
Remarks