3 Product Overview
◆
About this product
The RS-485 MEMOBUS/Modbus Interface is used to connect the
drive to a network using the MEMOBUS protocol.
By installing this option unit, the user can operate the drive with a
PLC or some other type of control device.
• Drive operation
• Monitor drive operational status
• Change drive parameter settings
◆
Applicable Models
The RS-485 Interface Option is used with these Yaskawa drive
models.
CIMR-J
<1> See "PRG" on the drive nameplate for software version
number.
YASKAWA ELECTRIC TOBPC73060033A RS-485 Interface Technical Manual
Drive
A
BA
3 Product Overview
Drive Software Version
≥1010
<1>
9