Identify The Components; Install The Library In The Rack - Spectra Logic T-Series Spectra T50e Install Manual

Rack-mount Instructions

Identify the Components

Unpack the rack-mount kit and identify the components listed in the
following table.
Component
Rail assemblies
Qty = 2
Screws
Qty = 16 (8 each)
Mounting brackets
Qty = 2
Guide Pulleys
Qty = 2
M5 screws
Qty = 2
I L
NSTALL THE
6
Rack-mount Instructions
Front
Shoulder
Bracket Pulley
IBRARY IN THE
Note: For ease of use, install the library near the center of the rack so
you can easily access the front panel, the Access port, and the
magazines.
Use
Supports the chassis in the rack.
Back
Each rail is pre-assembled and consists of the
following components:
Adjustable slider
Rails (2)
Attaches the rail assemblies to the rack. Size
used depends on rack type.
M6 x 8mm (small shoulder)
M6 x 8mm (large shoulder)
Secures the library to the rack.
Positions the library on rail shelves.
Note: These pieces are attached to the library
when it is shipped.
Secures the library mounting brackets to the
rack.
R
ACK
90970019