Led Stays Solid Red For A Long Time; Led Stays Solid Green For A Long Time; Led Stays Fast Blinking Blue For A Long Time (Fit Ap Mode); Led Does Not Turn Solid Blue Or Blinking Blue - Ruijie RG-AP820-I Installation And Reference Manual

Hardware Installation and Reference Guide
then verify that the cable is connected properly.

If you use a power adapter, verify that the power adapter is connected to an active power
outlet, and then verify that the power adapter works properly.
6.2.3

LED stays solid red for a long time

The LED stays solid red for a long time, indicating the Ethernet port is not connected. Verify the
Ethernet connection.
6.2.4

LED stays solid green for a long time

The AP performs initialization after power on. During this period, the LED stays solid green and
does not turn blue until the initialization is completed. Note: If the solid green persists for an hour,
it indicates the device initialization fails and the device is faulty.
6.2.5

LED stays fast blinking blue for a long time (Fit AP mode)

Sometimes the AP performs firmware upgrade after power on. During this period, the LED stays
fast blinking blue and does not turn solid until the upgrade is completed. Note: Do not plug or
unplug the power cord when the Status LED is blinking as firmware update takes time. If the
blinking persists for ten minutes, it indicates the device fails to complete firmware upgrade and is
faulty.
6.2.6

LED does not turn solid blue or blinking blue

After the system is booted and the LED does not turn solid blue or blinking blue, this may be
because the AP has not established a proper CAPWAP connection with the AC. Verify that the AC
is functioning and configured properly.
6.2.7

Client cannot find wireless network

(1) Verify that the device is properly powered.
(2) Verify that the Ethernet port is correctly connected.
(3) Verify that the AP is correctly configured.
(4) Adjust the distance between the client and the AP by moving the client device closer to the AP.
28
Troubleshooting