Basic Double Door Wiring Diagrams Using Factory Pre-Wired Connection - Assa Abloy NORTON RIXSON D6051 Series Installation Instructions Manual

Basic Double Door Wiring Diagrams Using Factory Pre-Wired Connection

Standard Function with Switches
Follower Unit
Fail Secure Electric Strike 24VDC Wiring
Follower Unit
24VDC
Electric Strike
(Fail Secure)
Follower Door
18
D6011/D6051 Series Double Unit Pull Side Power Operator
y For Master/Follow or Master-Coord/Follow only (Sync Cable must be used to
connect inverters.)
y Doors are normally closed.
y Activating either switch will open both doors. Door will close after hold open
time delay has expired.
Wall Switch, Card
Reader, Key Switch, etc.
(Normally Open
Momentary Dry Contact)
y For Master/Follow or Master-Coord/Follow only (Sync Cable must be used to
connect inverters.)
y Doors are normally closed and latched.
y Activating switch will unlock electric strike and door will automatically open.
Door will close after hold open time delay has expired.
y Door will remain locked during power failure.
24VDC
Electric Strike
(Fail Secure)
Follower Door
Wall Switch, Card
Reader, Key Switch, etc.
(Normally Open
Momentary Dry Contact)
Copyright © 2019, 2020, 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
Approved 2023-01-24
Wall Switch, Card
Reader, Key Switch, etc.
(Normally Open
Momentary Dry Contact)
Wall Switch, Card
Reader, Key Switch, etc.
(Normally Open
Momentary Dry Contact)
Master Unit
Master Unit
80-9360-1029-020 Rev 6 01/23