Updating Lto Drive Firmware - Spectra Logic Spectra RXT350 User Manual

Updating LTO Drive Firmware

Before you can update tape drive firmware, you need to obtain a firmware upgrade
tape from Spectra Logic.
To update LTO drive firmware, follow these steps:
Caution: Stop all backup operations before upgrading firmware.
1. Press the eject button (Figure 6-1) three times until a
Figure 6-1
The LTO drive face.
2. Press the eject button again until a
3. Press the eject button for three seconds until the flashing
4. Load the firmware code tape. It auto ejects when the update is finished.
Chapter 6. Managing Tape Drive Firmware
2 appears on the SCD.
49
0 appears on the SCD.
SCD
Eject
Button
C appears in the SCD.