Changing The Ip Address - Spectra Logic Spectra RXT350 User Manual

Changing the IP Address

1. Select Configuration > Network. The Network Settings screen displays
(Figure 2-3).
Figure 2-3
2. Select the IP address method. If you choose Static, enter the RXT350 Static
Address, Subnet, and Gateway.
3. Optionally, enter the Hostname and HTTP port settings. If you don't enter a new
port, the default port will be used.
4. Select Save.
5. Repeat this process for each RXT drive installed in the RXT350.
6. Proceed to Connecting the RXT350 to the Host on page 16.
Chapter 2. Initial Configuration
The Network Settings screen.
15