Advertisement
Joint
Dismantling
Remove retaining ring.
As a function of size, fix
bearing bush into spezial
tool SW23 or SW27 and
remove bearing bush by
light hammer blows onto
the yoke or by rotating it.
Assembly
Mount cross into yoke. Use
cross journals to guide
bearing needles when
inserting bushes.
When mounting second
yoke, make sure that
tapered lubricating fitting
is easily accessible.
All manuals and user guides at all-guides.com
Place joint as shown above and use light hammer blows to drive
up bearing bush.
Drive in bearing bush
until annular groove is
visible.
Relieve joint from stress
by applying hammer
blows to yoke ears.
11
Mount retaining ring.
Grease joint.
Advertisement
