Jensen A540 Di D-1703 EDR 80km/h Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Jensen Manuals
  4. Chipper
  5. A540 Di D-1703 EDR 80km/h
  6. Operating instructions manual

Jensen A540 Di D-1703 EDR 80km/h Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

WOODCHIPPER
Operating instructions
Type :
Machine Nr.:
Date of building :
List of spare parts
A540 Di D-1703 EDR 80km/h
561205630
05/2012
Jensen Service GmbH
D- 24975 Maasbüll
Tel.: 04634 / 9370-0
Fax: 04634 / 1025
E-mail: info@jensen-service.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the A540 Di D-1703 EDR 80km/h and is the answer not in the manual?

Questions and answers

Related Manuals for Jensen A540 Di D-1703 EDR 80km/h

Summary of Contents for Jensen A540 Di D-1703 EDR 80km/h

  • Page 1 WOODCHIPPER Operating instructions List of spare parts A540 Di D-1703 EDR 80km/h Type : 561205630 Machine Nr.: 05/2012 Date of building : Jensen Service GmbH D- 24975 Maasbüll Tel.: 04634 / 9370-0 Fax: 04634 / 1025 E-mail: info@jensen-service.de...
  • Page 3 Before attempting any maintenance on the machines, read the instruction and safety manuel thouroughly. We are always striving to improve our product and we reserve the right to bring about any changes and improvements which we consider to be appropriate. An obligation to any previously delivered machines and extended apparatus is ínvalid.
  • Page 5 At the side of the instruction manual, on the application and on the insert there are binding regulations concerning accident prevention and the recognised technical rules for safety which must be complyed with. We wish you much success with the use of our machine in your work. Jensen Service.
  • Page 7 (stamp / cachet) Datum Unterschrift (date) (signature) Vertrieb über: (distributed by / distribué par:) Jensen-Service GmbH . Bahnhofstraße 20-22 . D-24975 Maasbüll Tel.: +49 46 34 93 70 0 . Fax: +49 46 34 10 25 E-mail: info@jensen-service.de . Homepage: www.jensen-service.de...
  • Page 9 (stamp / cachet) Datum Unterschrift (date) (signature) Vertrieb über: (distributed by / distribué par:) Jensen-Service GmbH . Bahnhofstraße 20-22 . D-24975 Maasbüll Tel.: +49 46 34 93 70 0 . Fax: +49 46 34 10 25 E-mail: info@jensen-service.de . Homepage: www.jensen-service.de...
  • Page 11 (stamp / cachet) Datum Unterschrift (date) (signature) Vertrieb über: (distributed by / distribué par:) Jensen-Service GmbH . Bahnhofstraße 20-22 . D-24975 Maasbüll Tel.: +49 46 34 93 70 0 . Fax: +49 46 34 10 25 E-mail: info@jensen-service.de . Homepage: www.jensen-service.de...
  • Page 13 Konformitätserklärung Certificate of CE conformity Déclaration de conformité JENSEN - SERVICE GMBH Bahnhofstraße 20-22 D-24975 Maasbüll bestätigt hiermit, dass die von ihr hergestellte Maschine (Holzzerkleinerer) declares that the manufactured machine (wood chipper) déclare que la machine fabriquée (broyeur de branches)
  • Page 15 Specifications Typ A540 With Diesel engine Feed roller aperture 210 x 190 mm Feed roller width 210 mm Disc Ø 650 mm Disc thickness 30 mm Hopper (width x height) 1170 x 800 mm Max. chip capacity 190 mm Propulsion infeed rollers Hydraulic Cutting length adjustment Serial...
  • Page 16 Specifications A540 Di D-1703 EDR 80km/h Knott VGB18-MV Axle Brake: 25-2025 Axle load: 1800 kg Wheel mount: 5x112 Wheel screw: M12x1,5 60° 1100mm Knott KR20 Ausf. A13 Towing hitch KRK 20 Z Ausf. A5 Permissible total weight 1100-2000 kg Permitted towing hitch load...
  • Page 17 Bedeutung der Piktogramme Meaning of the pictograms Signification des pictogrammes Betekenis van de pictogrammen Piktogramme Bedeutung Position Pictogramm Meaning Place Pictogramme / Pictogrammen Signification / Betekenis Positionnement / Positie Vor Inbetriebnahme die Betriebs- anleitung und Sicherheitshinweise lesen und beachten. Service - Center Carefully read operator’s manual before Service - Center handling the machine.
  • Page 18 Bedeutung der Piktogramme Meaning of the Pictograms Signification des pictogrammes Betekenis van de pictogrammen Piktogramme Bedeutung Position Pictogram Meaning Place Pictogramme / Pictogrammen Signification / Betekenis Positionnement / Positie Gefahr durch sich drehende Maschinen- teile. Alle Maschinen je 1x Keep away from rotating machine parts. rechts u.
  • Page 19 Bedeutung der Piktogramme Meaning of the pictograms Signification des pictogrammes Betekenis van de pictogrammen Piktogramme Bedeutung Position Pictogram Meaning Place Pictogramme / Pictogrammen Signification / Betekenis Positionnement / Positie Gefahr durch fort schleudernde Teile bei laufendem Motor – Sicherheitsabstand halten. Trog rechts Danger –...
  • Page 20 Bedeutung der Piktogramme Meaning of the pictograms Signification des pictogrammes Betekenis van de pictogrammen Piktogramme Bedeutung Position Pictogram Meaning Place Pictogramme / Pictogrammen Signification / Betekenis Positionnement / Positie Schaltstellungen Stop – Einzug - Rückwärts Switch position Stop – Input – backwarts Trog rechts Right side from infeed chute Positionnement du commutateur...
  • Page 21 GENERAL SAFETY AND ACCIDENT PREVENTION INSTRUCTIONS With variations in machines, some of these statements may be contradictory as regards the servicing. In these cases it is advisable to follow the standard guidelines! Basic rules: Before anyone starts up the wood chipper study the safety rules for commerce and operation! Pay attention to the references in this operations guide as they are general legal safety and accident prevention instructions.
  • Page 22 On transport routes take precautionary safety measures to ensure that revolving pieces of equipment do not dangerously alter the area! Ensure that construction equipment/personnel are standing in a safe place! Additional weights In the construction of the Wood chipper, back and front propulsion is always sufficient for the load at the front and back respectively.
  • Page 23 Pay attention to the sliding clutch in the Cardan shaft and ensure that it is fully covered by the safety feature (machine and tractor) The covering of the safety features must be at least 50mm in total! Before turning on the PTO make sure that its high rotation speed power of the propulsion machine is equal to the permissible rotation speed of the Wood chipper! Before turning on the PTO take care that no one is in close enough proximity...
  • Page 24 In the event of the cap of the knife falling off, the chimney on that side will shake and stop! Only attempt the laying and removal of the V-belt when there is no movement! Safety features must be fitted according to the regulations! Safety preparations such as welding, sharpening, drilling etc.
  • Page 25 Hydraulic construction. Stop the permitted opperations pressure! The hydraulic structure is kept under high pressure! Under the high pressure it is possible that some of the high pressure fluids may escape (hydraulic oil). This is able to penetrate the skin and can cause serious injuries.
  • Page 26 General work safety references. The wood chipper is built to the very highest standards of engineering and is totally reliable. Despite this however, this product can also be dangerous when it is not operated according to the instructions. Every person who handles the fitting, works on, and tests the wood chipper, must have read and understood the entire instruction manual.
  • Page 27 The Jensen Woodchipper is designed for reducing shrubs, bushes, branches, orchard and vineyard prunings etc., of unlimited length. The machine is for mounting an a tractor 3- point linkage and may also be supplied on a single or twin axle chassis for trailed use.
  • Page 28 Suitable clothing Always wear - Safety helmet with face visor - Ear defenders - Thick gloves (Avoiding tight fitting gloves) - Overalls Avoid - Loose clothing - Ties - Anoraks with loose cords Starting the machine Always start with the feed rollers disengaged (‚stop‘ position). Start the tractor, and engage the PTO, building up to 540rpm gradually.
  • Page 29 For chippers where the feed rollers are powered by tractor hydraulics, the following oil flow rate is required: 50 Litres / minute Greasing instruction Wood chipper Jensen For detailed greasing instructions and intervals, please refer to the sheet 'Greasing instructions' which is part of this operating instructions.
  • Page 30 Operating instructions Push the green button Disengage feeding: Push the green button a second time Engage feeding: Push the red button Stop Recommended instructions during operation Branch wood to be fed always with heavier end towards retraction rollers. Should rotation of knives - disc drop during operation, push the disengaging lever, wait until disc reaches full operating rotation again, then activate feeding again.
  • Page 31 Knife grinding overview with wear limit A 041 / A141 A 240 knife - wear limit knife - wear limit von 110mm - 95mm von 80mm - 60mm A 340 A 430 knife - wear limit knife - wear limit von 100mm - 70mm von 80mm - 60mm A 540...
  • Page 32 Avoid from dirt when disassemble – mounting the counter-knife, clean the surfaces from dirt and chips. Attention: Use only spare parts origin JENSEN. No warranty in case of using other products. In case of spare part order always mention the number of this machine.
  • Page 33 Noise level L (dB) Type of Load No-load machine running running A 141 Di A 141 Z A 231 Di A 231 Z A 328 Di A 328 Z A 328 ZUX A 425 Di A 425 Z A 540 Di A 530 Di A 530 Z...
  • Page 34 Operating instructions infeed rollers STOP First touch on the STOP button is reverse, and the second touch is forward.
  • Page 35 Greasing Instruction A540 Both bearings of main shaft (pos.1) are filled with lithium-grease including anti-corrosive of penetration class 3. On normal working conditions this is sufficient for the lifetime of the bearing. The bearing must not be regreased to avoid substantiel decrease of lifetime of bearings. Greasing instructions for 8-working-hours-shift Quantity of lubricant, Pos.
  • Page 36 Operating Instructions for retraction roller gear General Read these instructions before you install, maintain or repair the gear boxes. Rotating shafts and hot parts could cause injury. All work has to be carried out by qualified personal only. Relevant safety regulations must be obeyed. Claims under guarantee can only be met if these instructions are complied with.
  • Page 37 Operating Instructions for retraction roller gear Lubrication The gear boxes are not filled with oil. Mineral or synthetic oils may be used as lubricant. During the first operating hours an oil film at shaft seals and around the vent valve may appear.
  • Page 38 KTR-N 40818 E KTR Kupplungstechnik ® C L A M P E X K T R 4 0 0 sheet: GmbH m o u n t i n g i n s t r u c t i o n s D-48407 Rheine edition: ®...
  • Page 39 KTR-N 40818 E KTR Kupplungstechnik ® C L A M P E X K T R 4 0 0 sheet: GmbH m o u n t i n g i n s t r u c t i o n s D-48407 Rheine edition: The clamping set is generally delivered in assembled condition.
  • Page 40 KTR-N 40818 E KTR Kupplungstechnik ® C L A M P E X K T R 4 0 0 sheet: GmbH m o u n t i n g i n s t r u c t i o n s D-48407 Rheine edition: Assembly...
  • Page 41 KTR-N 40818 E KTR Kupplungstechnik ® C L A M P E X K T R 4 0 0 sheet: GmbH m o u n t i n g i n s t r u c t i o n s D-48407 Rheine edition: Disassembly...
  • Page 42 Joint Clean PTO shaft. Operate quick- Connecting Actuate locking disconnect lock. Pull on the PTO drive or push depending shaft. on lock model. For excessive Wide-angle CV PTO Joint articulations, drive shaft articulation stop PTO shaft. Check joint articulation in operation and standstill 1.
  • Page 43 Joint Dismantling Remove retaining ring. Place joint as shown above and use light hammer blows to drive up bearing bush. As a function of size, fix bearing bush into spezial tool SW23 or SW27 and remove bearing bush by light hammer blows onto the yoke or by rotating it.
  • Page 45 Operating instructions HMCflex Service staff Version 2.0 Distribution and copying of this document, together with use and communication of its contents, are not permitted, except by express prior permission. Infringements are actionable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. 1/23 ©...

  • Page 47: Brief Guide

    HMCflex Operating instructions Brief guide HMCflex Overview • Operating / Fault LED Display Arrow keys SET key HMCflex, detailed front view Function of the keys Display of the chosen operating values; confirmation key for parameterisation Function key F2: Next display; increase value and number Function key F1: Previous display;...

  • Page 48: Table Of Contents

    Operating instructions HMCflex List of contents Brief guide ..........................2 HMCflex Overview ........................2 Function of the keys ......................2 General ........................4 Introduction ....................... 4 Target group ......................4 Important instructions for using the device ..............4 Repairing devices ..................... 5 Operating the HMCflex .....................

  • Page 49: General

    HMCflex Operating instructions 1. General 1.1 Introduction The HMCflex offers a wide range of functions for the management and monitoring of both conven- tional and electronically controlled diesel engines. The settings can be individually configured for the widest variety of applications and different versions of the engine. For example, the HMCflex can pro- vide preheat, glow or afterglow for the engine up to 70 A, depending on the time and temperature.

  • Page 50: Repairing Devices

    Operating instructions HMCflex 1.4 Repairing devices If a repair should become necessary, send the device back to: ehb electronics GmbH Hans-Böckler-Str. 20 30851 Langenhagen Please ensure that a written description of the fault is included with the device. This will greatly assist the ehb electronics gmbh Service Department in identifying the fault, so the HMCflex can be more quickly repaired and returned.

  • Page 51: Operating The Hmcflex

    HMCflex Operating instructions 2 Operating the HMCflex 2.1 Connection The HMCflex is fixed to the floor using the clamps delivered with it or via the 3 x M6 screw fittings. The electrical connection of the HMCflex is achieved using a 19-pole German socket of the HDP 26-24-19 SE type.

  • Page 52: Switching On / Off

    Operating instructions HMCflex 2.2 Switching on / off The HMCflex is switched on via the ignition switch that is integrated into the control system (position 1) with terminal 30 activated. Once the preheating time is over, the engine can be started (position 2). In this way you get straight into the operating mode where the speed, operating hours, oil pressure and engine temperature are displayed.

  • Page 53: Changing The Settings On The Hmcflex

    HMCflex Operating instructions 3 Changing the settings on the HMCflex Where there is to be any change to the factory presettings, the HMCflex must be programmed after the initial installation. Programming is only possible with the engine at a standstill. You access the parameterisation mode by pressing the SET key and at the same time turning the ignition key to the ignition position.
  • Page 54 Operating instructions HMCflex Setup menu overview diagram *** Settings *** Pin no.: For the factory-set code for the setup menu, please enter 1000 with the arrow keys and confirm the individual figures with the SET key. Next you go into the "setup menu" field, as you can see from the diagram below.
  • Page 55 HMCflex Operating instructions [6] autostart on/off SET on/off SET options RepEngStart SET 1-5 SET input duration SET 1-45s SET input SET 1-45s SET input pause exit SET Back to Options [7] emergency oil pressure SET shutd, alarm, without, CDown SET options temperature SET shutd, alarm, without, CDown SET options...

  • Page 56: Service Overview Diagram

    Operating instructions HMCflex 3.1 Service overview diagram ***Service*** Pin no.: For the factory-set code for the service menu, please enter 1884 with the arrow keys and confirm the individual figures with the SET key. Next you go into the service menu field, as you can see from the diagram below.
  • Page 57 HMCflex Operating instructions [3] Security Options/ Input Settings Sub-menu Note Arrow key [1] Locking 1) languages SET options [2] sensors SET options [3] output SET options 4) glowtime SET options 5) altern. excitation SET SET options 6) autostart SET options 7) Emergency SET options 8) error delay...

  • Page 58: Daily Operating Hours Meter Overview Diagram

    Operating instructions HMCflex 3.3 Daily operating hours meter overview diagram ***day hours*** Pin no.: For the factory-set code of the daily hour meter menu you enter 0000 please with the arrow keys and confirm the individual numbers with the set key. You arrive directly into the inquiry daily operation hours delete.

  • Page 59: Chipper Overview Diagram

    HMCflex Operating instructions 3.5 Chipper overview diagram For the factory-set code of the total hour meter menu you enter 6000 please with the arrow keys and confirm the individual numbers with the set key. [6] Chipper Options/ Input Settings Sub-menu Note Pfeiltaste Pulses / Rev...

  • Page 60: Explanations Of The Adjustable Parameters

    Operating instructions HMCflex Explanations of the adjustable parameters [1] Settings Parameters Explanations [1] language language You can choose between German, English, French and Spanish [2] sensors temperature The HMCflex can be factory set for the usual types of temperature sensor. The type of temperature monitoring is programmed under [10] Inputs/Outputs.
  • Page 61 HMCflex Operating instructions [4] glow times temp1 Temp 1 gives a value for the temperature-dependent preheating. Higher or lower value is automatically recognised by the management system by com- paring temp 1 and temp 2. The management system determines the glow times between the values in a linear way, depending on time temp 1 and time temp 2.
  • Page 62 Operating instructions HMCflex cool down time (Cdown). disengage Monitoring of the start speed can be programmed as powering down (shutd), warning (alarm), without monitoring (without) or as power down with cool down time (Cdown). min.speed Monitoring of under speed can be programmed as powering down (shutd), warning (alarm), without monitoring (without) or as power down with cool down time (Cdown).

  • Page 63: Definition Of The Concepts Of Speed And Pulse Per Revolution

    HMCflex Operating instructions [10] inputs/outputs All outputs are monitored for wire breaks, therefore the operating voltage is present on open outputs via a high-impedance resistor. The functions of the outputs can only be checked when they are under load. ext.Stop The external stop input can be programmed as NC, NO or without query.

  • Page 64: Speed Measurement Through The Impulses Of Terminal "W

    Operating instructions HMCflex 5.1 Speed measurement through the impulses of terminal "W" In order to be able to establish the frequency (alternator terminal "W"), two factors must be known. On the one hand, this involves the transmission ratio from the alternator to the crankshaft, which you can calculate as follows: Diameter belt pulley crankshaft Transmission ratio (i) =...

  • Page 65: Inputs

    HMCflex Operating instructions grammed temperature, the HMCflex retains the glowtime, which was programmed for the upper tem- perature. Chart of temperature-dependent preheating Chippercontrol In operation only the feed is controlled by the speed. The output return stroke can only be manually activated via external buttons.
  • Page 66 Operating instructions HMCflex Humidity 48 h As per SAE J1378 Vibration 6 h, 10-80 Hz 20 g As per SAE J1378 Shock 72 x, 9-13 ms 44 g 55 g As per SAE J1378 2 x 16 lines Alphanumeric Dimensions - housing 80 x 120 x 100 mm Fixing: On vibration dampers or clamps...

  • Page 67: Diagram

    HMCflex Operating instructions 10 Diagram 22/23 © ehb errors and omissions excepted Operating instruction...

  • Page 68: Document Information, History

    Operating instructions HMCflex 11 Document information, history Project: HMCflex Type of document: Technical documentation Version: V2.0 Created on: Author: ehb electronics GmbH, Langenhagen Revisions: Version: Handling: Creation of provisional operating instructions 01.07.2008 H. Appen Additions and software adaptation, new wiring diagram 07.10.2008 Blume/Appen Additions and software adaptation, new wiring diagram...
  • Page 71 Service Schedule...
  • Page 72 Service Schedule every every every every every Internal combustion Internal combustion after first after first after first every after first 100 hours Wood chipper 8 hours 50 hours 200 hours 250 hours engine HATZ engine KUBOTA 5 hours 10 hours 20 hours 20 hours 50 hours...
  • Page 73 Service Schedule every every every every every every every every every every Internal combustion Internal combustion Wood chipper 1000 1500 2000 3000 engine HATZ engine KUBOTA hours hours hours hours hours hours hours months years years Change oil filter Change fuel filter Change fuel pre filter Maintenance of the air filter...
  • Page 74 Jensen Service GmbH Bahnhofstraße 20-22 D-24975 Maasbüll Tel.: 04634 / 9370-0 Telefax: 04634 / 1025 eMail: info@jensen-service.de http://www.jensen-service.de...
  • Page 75 Original – Ersatzteile Original - spare parts Pièces de rechange d’origine...
  • Page 76 Hydraulikanlage Hydraulic system Circuit hydraulique Die mit einem "+" gekennzeichneten Teile sind nicht abgebildet! Parts marked "+" are not shown in figures! Les positons précédées du signe "+" ne sont pas représentées!
  • Page 77 Hydraulikanlage Hydraulic system Circuit hydraulique Pos. Nr.: Bestell Nr.: Bezeichnung Anzahl Designation Designation Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 21302 Hydraulikschlauch tube tuyeau 9879 Hydraulikschlauch tube tuyeau 21470 Hydraulikschlauch tube tuyeau 19156 Hydraulikschlauch tube tuyeau 9731 Hydraulikschlauch tube tuyeau...
  • Page 79 Motorantrieb Engine drive Propulsion moteur Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 66018 Flanschwelle shaft arbre 3054 Schnorrsicherung washer rondelle 16191 Inbusschraube cylinder screw vis à téte cylindrique 7293 Paßfeder fitting key clavette plate...
  • Page 81 Spannrolle Tension pulley Galet Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. tension pulley slab 66087 panneau Spannrollenplatte spacer sleeve 40019 Distanzbuchse douille 25085 Rillenkugellager ball joint bearing roulement tension pulley galet 40022 Spannrolle...
  • Page 83 Hauptwelle Main shaft Arbre principal Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 65011 Hauptwelle main shaft arbre principal 2595 Paßfeder fitting key clavette plate chipper disc Messerscheibe volant à fenêtres -------- (see chipper (siehe Messerscheibe)
  • Page 85 Messerscheibe Chipper disk Volant à fenêtres Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 66070 Messerscheibe knife disc disque a deux couteaux 2665 Messer knife couteau Z-Messer Z-knife Z-couteau 23149 Z-Messer Z-knife Z-couteau...
  • Page 87 Gegenmesser Counter knife Contre couteau Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 9416 Gegenmesser counter knife contre couteau 9162 Spannpratze fixing device griffe d'arret 22022 Scheibe washer rondelle 5158 Sechskantschraube hexagon screw vis hexagonale 65009...
  • Page 89 Walzeneinzug Retraction roller drive Transmission a rouleau Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 9496 Walzengetriebe roller transmission roleau transmission 66010 obere Einzugswalze upper roller rouleau superieure 66169 obere Z-Einzugswalze upper Z-roller Z-rouleau superieure 66009...
  • Page 91 Auswerfer ejector Goulotte d' Ejection Pos. Nr.: Bestell Nr.: Bezeichnung Designation Designation Anzahl Fig. Nr.: Order Nr.: pcs. Fig. Nr.: Ordre Nr.: pcs. 66049 Auswerfer ejector Goulotte d' ejection 16535 Auswerferklappe adjustable trab Clapet articulé pour goulotte 16538 Verstellstange adjustment lever levier d' articulation 20021 Unterlegscheibe...
  • Page 93 Lichtbrett / Light-set / Set éclairage Pos. Nr. Artikelnummer Beschreibung Fig. No. Order No. Designation Pcs. Fig. Nr. Ordre No. Designation Pcs. Lichtbrett, 1520 mm 20805 Light-set Set éclairage Beleuchtungseinheit, links Illuminator, left 40192 Unité d`éclairage, gauche Beleuchtungseinheit, rechts 40193 Illuminator, right Unité...
  • Page 94 Auflaufeinrichtung - KHV 20-B Frein á inertie - KHV 20-B Overrunning brake - KHV 20-B Bauartbedingte Bildabweichungen möglich! De légéres différences clûes á la construction peuctent apparaitre sur l' image! Differences between construction and picture are possible!
  • Page 95 Auflaufeinrichtung - KHV 20-B Frein á inertie - KHV 20-B Overrunning brake - KHV 20-B Pos./ Best.- Nr.:/ Stch./ Rep./ Ordre Nr.:/ Qte'/ Bezeichnung Designation Designation Intem/ Order Nr.:/ Qty/ 20307 Gehäuse verz. housing zinc - plated boiter compl. 20308 Führungslager Palier - Guide guide bearing...
  • Page 96 Radbremse - 25-2025 Frein - 25-2025 Brake - 25-2025 Bauartbedingte Bildabweichungen möglich! De légéres différences clûes á la construction peuctent apparaitre sur l' image! Differences between construction and picture are possible!
  • Page 97 Radbremse - 25-2025 Frein - 25-2025 Brake - 25-2025 Pos./ Best.- Nr.:/ Stch./ Rep./ Ordre Nr.:/ Qte'/ Bezeichnung Designation Designation Intem/ Order Nr.:/ Qty/ 20421 Kugelbundschraube Vis a' embase convexe Spherical collar screw 20225 Kugelbundschraube Vis a' embase convexe Spherical collar screw 20422 Kappe Capouchon...
  • Page 98 Jensen Service GmbH Bahnhofstraße 20-22 D-24975 Maasbüll Tel.: 04634 / 9370-0 Telefax: 04634 / 1025 eMail: info@jensen-service.de http://www.jensen-service.de...

This manual is also suitable for:

561205630

Table of Contents

Save PDF