ensto ECO16Touch User Manual page 52

Temperature Scale 2/3
Mon 11:15
23.5
°
17:00
Manual Other...
Mon 11:15 Minimum Temp. Scale
1
5
15°
23.5
°
17:00
6 7 6
Manual Other...
Heating Schedule
Adaptive Function Adaptive Function
Energy Use Heating Schedule
Open Window Open Window
Temperature scale and
User Settings Energy Use
8
Limit calibrated
2
Sensor Application Sensor Application
Engineer Settings User Settings
Sensor Type Sensor Type
Engineer Settings
Heating Schedule
Floor Sens. Calibr. Floor Sens. Calibr.
Energy Use
Adaptive Function Maximum Temp. Scale
Room Sens. Calibr. Room Sens. Calibr.
3
8
User Settings
Temp. Scale Temp. Scale
Open Window
35°
Engineer Settings
Factory Reset Factory Reset Sensor Application
9 10 9
Sensor Type
Floor Sens. Calibr.
Set the min and max
Room Sens. Calibr.
temperature that the
thermostat can operate
Temp. Scale
at
Factory Reset
4
PAGE 52
• Minimum Temp . Limit – use this setting to maintain a comfort temperature on tile
floors . Can be set between 5°C and 25°C .
1
• Maximum Temp . Limit – use this setting to protect wooden floors from excessive
temperatures . Can be set between 10°C and 40°C .
NOTE: If the maximum limit for floor temperature is set too high, sensitive floor types
may be permanently damaged .
1 . Tap the "Menu" button on the home screen .
2 . Then tap the "Engineer Settings" button .
3 . Scroll down and tap the "Temp. Scale" button .
4 . Confirm that you want to set minimum and maximum operating temperatures for
the thermostat by tapping "√" or cancel with "X" .
5 . If "√" is chosen, you can set a Minimum Temp .Scale .
6 . Use the "Up Arrow" or "Down Arrow" button to change the Minimum Temp .
Scale .
7 . Confirm the setting with "√" .
8 . You can now set a Maximum Temp .Scale .
9 . Use the "Up Arrow" or "Down Arrow" button to change the Maximum Temp .
Scale .
10 . Confirm the setting with "√" .
If "Room/Floor Limit" has been selected under "Sensor Application", proceed
to step 10 . Otherwise, proceed to step 16 .
< >
Contents