ensto ECO16Touch User Manual page 50

Room Sensor Calibration
Mon 11:15
23.5
°
17:00
Manual Other...
Mon 11:15 Actual Room Temp.
1
24.3°
23.5
°
17:00
6 7 6
Manual Other...
Heating Schedule Heating Schedule
Adaptive Function
Heating Schedule Energy Use Energy Use
Adaptive Function Open Window
Energy Use User Settings User Settings
Room sensor calibrated
2
Sensor Application
Open Window
Engineer Settings Engineer Settings User Settings
Sensor Application Sensor Type
Engineer Settings
Floor Sens. Calibr. Sensor Type
Adaptive Function
Room Sens. Calibr. Floor Sens. Calibr.
3
Temp. Scale
Room Sens. Calibr. Open Window
Temp. Scale Factory Reset Sensor Application
Sensor Type Factory Reset
Floor Sens. Calibr.
Current reading from
Room Sens. Calibr.
room sensor is
23.2°
Temp. Scale
Calibrate sensor?
Factory Reset
4
PAGE 50
This option allows you to calibrate the room sensor .
1
You should calibrate the sensor if the temperature reading differs from the actual
room temperature .
You can calibrate the sensor with +/- 10°C in steps of 0 .5°C in the following way:
1 . Tap the "Menu" button on the home screen .
2 . Then tap the "Engineer Settings" button .
3 . Scroll down and tap the "Room Sensor Calibration" button .
4 . Confirm that you want to calibrate the sensor with "√" or cancel with "X" .
5 . If "√" is chosen, you must then offset the thermostat to reflect the room
temperature actually measured .
6 . Use the "Up Arrow" or "Down Arrow" button to set the measured room
temperature .
7 . Confirm the value with "√" . A confirmation screen will be displayed briefly .
8 . The thermostat will automatically return to "Engineer Settings" .
< >
Contents