ensto ECO16Touch User Manual page 14

Manual
Manual
1
23.5
°
3 4
5 6
PAGE 14
Manual allows you to override Scheduled Operation and maintain a specified tem-
perature around the clock .
2
1 . From the Scheduled Operation home screen, tap the "Manual" button to access
manual override .
Note: If Eco is enabled, "Manual" will be found in the "Other" menu .
You can use "Manual" to override the programmed event schedule .
The thermostat will continue to operate in Manual until you return it to Scheduled
Operation .
7
2 . Use the "Up Arrow" or "Down Arrow" button to select the required temperature .
Then simply leave the thermostat as it is .
While in Manual Override, an "X" button is shown in the lower left corner of the home
screen . Press this button to return the thermostat to Scheduled Operation .
The function of the buttons and symbols shown on the home screen varies according
to the chosen operating mode .
Manual home screen:
1 . Indication of Manual Override .
2 . Tap here to access the menus .
3 . Icon indicating the current operating mode (hand = Manual) .
4 . Current target/setpoint temperature (if shown in red, heating is being provided) .
5 . Tap here to return to Scheduled Operation .
6 . Tap here to decrease the target/setpoint temperature .
7 . Tap here to increase the target/setpoint temperature .
< >
Contents