Chapter 5 — Configuring General Features
Configuring the Low Power Shutdown Delay
SET-------------------------------------
0 Seconds (No
Delay)
2 Seconds
5 Seconds
148
This feature allows for quick successive reads in the Low Power
mode. Low Power Shutdown Delay is the amount of delay
after the trigger is released before the scanner transitions into
shutdown. The following bar codes provide for transition times
of 0 (no delay), 2, 5, or 10 seconds delay.
For other Low Power Shutdown Delay settings, contact Intermec
Product Support.
To set the Low Power Shutdown Delay option
1 Scan the SET bar code.
2 Scan the bar code for the delay.
3 Scan the END bar code.
---------
---------
---------
SR60 Scanner Programmer's Reference Manual