Set to Two Reads ---------
Set to Three Reads ---------
Set to Four Reads ---------
END------------------------------------
Standard 2 of 5/IATA Options
About Standard 2 of 5/IATA Options
SR60 Scanner Programmer's Reference Manual
Chapter 4 — Enabling and Configuring Symbologies
This section describes the Code 39 options and contains the
programming bar codes you can use to configure those options.
The Standard 2 of 5/IATA symbologies have the following
programmable features:
• Check Digit
• Label Length Format
• Read Verification
Check Digit
Check Digit calculates the check digit to verify that the check
digit contained in the bar code label is correct. If you enable this
feature, your bar codes must contain a check digit.
121