Disabling A Global Prefix Or Suffix - Intermec SR61T2D Programmer's Reference Manual

Chapter 3 — Configuring Label Transmit Settings
Set Suffix
Use the ASCII table on page 164 to identify the ASCII character(s)
and the corresponding hex code(s) for the suffix. Then use the bar
codes on page 160 to scan the four digits corresponding to the hex
values.
END------------------------------------

Disabling a Global Prefix or Suffix

Disabling Global Prefix/Suffix Characters
SET-------------------------------------
Set Prefix
52
---------
You can disable a global prefix or suffix.
To disable global prefix or suffix characters
1 Scan the SET bar code on this page.
2 Scan the Set Prefix or Set Suffix bar code.
3 Scan the 0 digit four times to disable the prefix or suffix
characters.
4 Scan the END bar code.
---------
SR60 Scanner Programmer's Reference Manual