Configuring The Low Power Shutdown Delay - Intermec SR60 Programmer's Reference Manual

Enable Step #2
Disable Step #1
Disable Step #2
END ------------------------------------------

Configuring the Low Power Shutdown Delay

SET ------------------------------------------
SR60 Scanner Programmer's Reference Manual
---------
---------
---------
This feature allows for quick successive reads in the Low Power
mode. Low Power Shutdown Delay is the amount of delay after
the trigger is released before the scanner transitions into shut-
down. The following bar codes provide for transition times of 0
(no delay), 2, 5, or 10 seconds delay.
For other Low Power Shutdown Delay settings, contact Intermec
Product Support.
To set the Low Power Shutdown Delay option
1 Scan the SET bar code.
2 Scan the bar code for the delay.
3 Scan the END bar code.
Chapter 5 — Configuring General Features
141