Toshiba HWT-601XWHM3W-ETR Service Manual page 206

Exchange
No.
parts name
1. Detachment
Plate stay
1) Following to work of Detachment of
2) Remove the plate stay and base plate screws.
(Φ4 × 10, 2 screws hexagon screws)
3) Remove plate stay.
2. Attachment
Attach the plate stay in the reverse process of
"1. Detachment".
1. Detachment
Air-outlet
cabinet
1) Following to work of Detachment of
2) Remove the screws from the Air-outlet cabinet and
separate plate. (Φ4 × 8, 3 screws)
3) Remove the screws from the Air-outlet cabinet and
base plate. (Φ4 × 10, 2 screws hexagon screws)
4) Remove the screws from the Air-outlet cabinet and
motor base. (Φ4 × 8, 2 screws)
5) Remove the screws from the Air-outlet cabinet and
heat exchanger. (Φ4 × 8, 3 screws)
2. Attachment
Attach the Air-outlet cabinet in the reverse process of
"1. Detachment".
Side 1. Detachment
cabinet
1) Following to work of Detachment of
(right)
2) Remove the screws securing the inverter assembly
and side cabinet (right). (Φ4 × 8, 2 screws)
3) Remove the screws form the side cabinet (right) and
valve fixing plate. (Φ4 × 8, 2 screws)
4) Remove the screws form the side cabinet (right) and
piping panel (rear). (Φ4 × 10, 2 hexagon screws)
5) Remove the screws form the side cabinet (right) and
base plate. (Φ4 × 10, 1 hexagon screw)
6) Remove the screws from the side cabinet (right) and
heat exchanger. (Φ4 × 10, 3 hexagon screws)
2. Attachment
Attach the side cabinet (right) in the reverse process of
"1. Detachment".
Work procedure
.
and
.
205
Base plate Base plate Base plate
Heat exchanger
.
Air-outlet Air-outlet Air-outlet
cabinet cabinet cabinet
Base plate
Heat exchanger
Inverter Inverter Inverter
assembly assembly assembly
Side cabinet Side cabinet Side cabinet
(right) (right) (right)
Base plate Base plate Base plate
Valve fixing plate
R e m a k r s
Plate stay
Motor base Motor base Motor base
Separate plate Separate plate Separate plate