Related Manuals for Toshiba HWS-804XWHM3-E1
Summary of Contents for Toshiba HWS-804XWHM3-E1
- Page 1 AIR TO WATER HEAT PUMP Owner’s Manual Hydro Unit Model name: HWS-804XWHM3-E1 HWS-804XWHT6-E1 HWS-804XWHT9-E1 HWS-1404XWHM3-E1 HWS-1404XWHT6-E1 HWS-1404XWHT9-E1 English...
-
Page 2: Table Of Contents
Owner’s Manual Hydro Unit Thank you very much for purchasing TOSHIBA Air to Water Heat Pump. Please read this owner’s manual carefully before using the system. • Be sure to obtain the “Owner’s manual” and “Installation manual” from constructor (or dealer). -
Page 3: Safety Precautions
Owner’s Manual Hydro Unit Safety precautions DANGER • Do not attempt to install this unit yourself. • This unit requires a qualified installer. • Do not attempt to repair the unit yourself. • This unit has no components which you can repair. •... - Page 4 Owner’s Manual Hydro Unit • When the Air to Water Heat Pump is operated together with a combustion device in the same place, pay careful attention to ventilation and let fresh air into the room. Poor ventilation can cause an oxygen shortage. •...
-
Page 5: Names And Functions Of Parts
Owner’s Manual Hydro Unit Names and functions of parts Buttons ▼ Fig. 2-01 Switches setting temperature 1. TEMP. button: Changes the set temperature for 11. AUTO TEMP. automatically according to outside each operation mode (ZONE1/2 button: temperature. (Pressing this button hot water) by 1 °C step. - Page 6 Owner’s Manual Hydro Unit Meaning of Indication ▼ Fig. 2-02 Heating side [ZONE1, 2] Hot water side 18. Indication Description 20. Indication Description Lights when floor heater or radiator is connected (when the system has floor heater or radiator). Lights when hot water supply system is connected (when the system has Lights when controlling the second...
- Page 7 Owner’s Manual Hydro Unit 19. Indication Description Clock: Displays the current time (AM or PM). Displays days of the week (Sunday to Saturday). Lights when the NIGHT button is pressed and goes out when the button is pressed again. Lights when nighttime quiet operation is set. Indicates scheduled operation 1 status (including setting time).
-
Page 8: How To Use Functions
Owner’s Manual Hydro Unit How to use functions Timer setting Heating or cooling operation Function not available on follower remote controller Performing heating or cooling operation First, set the current time on the remote controller. • Press the ZONE1, 2 button to start heating Procedure to set the current time and day of the week or cooling operation. - Page 9 Owner’s Manual Hydro Unit Hot water Performing Auto mode operation • The setting temperature can be set automatically according to the outside temperature. Performing hot water supply operation • Press the AUTO TEMP. button. • The temperature indication changes to “A” and the •...
- Page 10 Owner’s Manual Hydro Unit Useful functions Night setback This function is used to save heating operation during specified time zone (sleeping hours, etc.) at night. Frost protection • When the NIGHT button is pressed during heating (ZONE1 or ZONE2), appears on the This function performs operation with the minimum remote controller and the night setback operation is...
- Page 11 Owner’s Manual Hydro Unit Schedule timer Anti bacteria This function performs anti-bacteria operation of the (Disable with second remote controller) hot water tank. • When the ANTI BACTERIA button is Operations can be scheduled in eight STEPs for each pressed, the mark appears on the remote day of the week.
- Page 12 Owner’s Manual Hydro Unit • Existing schedule setting Determine the settings. → → → → Procedure: • Press the SET button to determine the settings. • The “__” mark lights under the set day of the week and the “ ”...
-
Page 13: User Maintenance
Owner’s Manual Hydro Unit User maintenance Periodic maintenance (once a year) is necessary for this product. Consult the installation company. If a problem occurs, contact the installation company or dealer. Air to Water Heat Pump operations and performance 3 minutes protection function 3-minutes protection function prevents the air to water heat pump from starting for initial 3 minutes after the main power switch/circuit breaker is turned on for re-starting the air to water heat pump. - Page 14 R410A Dimension HxWxD (mm) 1,340x900x320 Cord heater – 80 class Hydro Unit HWS-804XWHM3-E1 HWS-804XWHT6-E1 HWS-804XWHT9-E1 Back up heater capacity for back up heater 220-230 V~ 50 Hz 380-400 V 3N~ 50 Hz 380-400 V 3N~ 50 Hz Power supply for hot water cylinder heater...
-
Page 15: Troubleshooting
Owner’s Manual Hydro Unit HWS-1501CSHM3-E HWS-2101CSHM3-E HWS-3001CSHM3-E Hot water cylinder (option) HWS-1501CSHM3-UK HWS-2101CSHM3-UK HWS-3001CSHM3-UK Power supply 220-230 V~ 50 Hz Water volume (liter) Max water temperature (°C) Electric heater (kW) Height (mm) 1,090 1,474 2,040 Diameter (mm) Material Stainless steel Troubleshooting If a problem occurs, contact the installation company or dealer. - Page 16 (Name of the manufacturer) TOSHIBA CARRIER CORPORATION 336 Tadehara, Fuji-shi, Shizuoka-ken, (Address, city, country) 416-8521 Japan (Name of the Importer/Distributor in EU) Toshiba Carrier UK Ltd. Porsham Close, Belliver Industrial Estate, PLYMOUTH, (Address, city, country) Devon, PL6 7DB. United Kingdom EF99908301...