Toshiba HWT-601XWHM3W-ETR Service Manual page 169

13. Display Function of Set Temperature and Other Settings
• The sensor sensing temperature is displayed on the remote controller.
• This function allows you to make sure whether the sensor is installed properly.
▼Sensor temperature display calling
<Procedure>
1
Press the [ ] button and the [
seconds or longer on the top screen to display the "FIELD SETTING
MENU".
2
Press the [ ] / [
FIELD SETTING MENU screen, then press the [
3
Press the [ ] button to select the unit,
then press the [
the status.
] button at same time for 4
] button to select "Service monitor" on the
] button to display
] button.
Service monitor
1 - 7
1 - 1
1 - 4
1 - 8
1 - 2 1 - 5
1 - 6
1 - 3
UNIT SET
168
FIELD SETTING MENU(2/2)
Service monitor
Hydro Unit DN
Remote controller DN
Reset power consumption data
Sensor information
SET
Service monitor
Code Data
RETURN