Set Up and Operation ............................... 9 Charging the built-in battery ............................9 Control Modes ................................10 One Eventspot 60 Q7 (Manual mode) ........................10 One Eventspot 60 Q7 (Built-in Programs) ......................10 Multiple Eventspots 60 Q7 (Wireless DMX Control) ....................10 Disconnect from the Wireless DMX signal transmitter ..................11 Data Cabling ................................11...
Page 3
Eventspot 60 Q7 Troubleshooting ................................28 No Light ..................................28 No Response to DMX ..............................28 Product Specifications ..............................30 Dimensions ..................................31 Notes ....................................32 Ordercode: 42727...
Save the carton and all packing materials. In the event that the fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Eventspot 60 Q7 ● Adapter charger DC 24V (1,75 m) ● User manual LED Expected Lifespan LEDs gradually decline in brightness over time.
Page 5
For replacement, use fuses of same type and rating only. The user is responsible for correct positioning and operating of the Showtec Eventspot 60 Q7. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
When rigging, derigging or servicing the Eventspot, always make sure, that the area below the installation site is secured and that there are not any unauthorized people around. The Eventspot 60 Q7 can be placed on a flat stage floor or mounted to any kind of truss with a clamp. Ordercode: 42727...
Eventspot 60 Q7 Connection with the mains Connect the device to the mains with the power plug. Always check if the right color cable is connected to the right place. International EU Cable UK Cable US Cable BROWN YELLOW/COPPER PHASE...
Description of the device Features The Eventspot 60 Q7 is the smallest member of the Eventspot series. Although it has a small size its features are great. The Eventspot 60 Q7 is equipped with one 7-in-1 LED offering an extremely wide color palette.
Page 9
Eventspot 60 Q7 DMX Channel Summary HSIC Channel Description Master Dimmer Hue (color variations) Hue (color variations) fine Red color saturation Color macro’s white Special strobe Dimmer speed Channel Description Master dimmer Green Blue White Amber Cyan Special strobe Dimmer speed...
Do not attempt to operate a 120V specification product on 230V power, or vice versa. Charging the built-in battery 01) In order to charge the battery, you need either the included charger for Eventspot 60 Q7 or the optional flightcase with built-in chargers (42729).
Wireless DMX (W-DMX) One Eventspot 60 Q7 (Manual mode) 01) When the Eventspot 60 Q7 is not connected by Wireless DMX, it functions as a stand-alone device. See page 14 for more information about the manual mode. One Eventspot 60 Q7 (Built-in Programs) 01) When the Eventspot 60 Q7 is not connected by Wireless DMX, it functions as a stand-alone device.
2.4GHz wireless signal transmitter is OFF. The Eventspot 60 Q7 is only a WDMX receiver and never a WDMX sender The Eventspot 60 Q7 has a total of 4 DMX channel configurations, referred as Personalities. The 4 Personalities are HSIC, SSP, Tour and TR16 .
Eventspot 60 Q7 Control Panel A).LCD Display B). MENU button C).ENTER Button D).UP Button E). DOWN Button Fig.03 DMX Control Mode The fixtures are individually addressed and connected to the W-DMX transmitter. The W-DMX transmitter is connected to the DMX controller. The fixtures respond to the DMX signal from the controller.
Eventspot 60 Q7 Main Menu Options 01) Upon start-up, the display will interchangeably show two screens: 02) Press the ENTER button to open the main menu. The display will show: 03) Press the UP/DOWN buttons to toggle between the 10 menus.
Eventspot 60 Q7 2. DMX Address With this menu you can set the device’s DMX starting address. 01) While in the main menu, press the UP/DOWN buttons to choose ADDRESS. 02) Press the ENTER button to open the menu. The display will show: 03) Press the UP/DOWN buttons to set the desired DMX address.
Eventspot 60 Q7 5. Edit Mode With this menu, you can create your own custom programs. 01) While in the main menu, press the UP/DOWN buttons to choose EDIT. 02) Press the ENTER button to open the menu. The display will show: 03) Press the UP/DOWN buttons to choose the desired custom program (PROGRAM1 –...
Eventspot 60 Q7 6.2. Color With this menu, you can adjust the color calibration functions. 01) While in SETTING menu, press the UP/DOWN buttons to choose COLOR. 02) Press the ENTER button to open the menu. 03) Press the UP/DOWN buttons to toggle between the 3 options: RGBW, OFF or UC.
Eventspot 60 Q7 8. Calibration With this menu, you can calibrate the device’s colors. 01) While in the main menu, press the UP/DOWN buttons to choose CALIBRATION. 02) Press the ENTER button to open the menu. 03) Insert the password in order to access the menu. Press the buttons in the following order: UP, DOWN, UP, DOWN and press the ENTER button to confirm.
Eventspot 60 Q7 9. Software information With this menu you can view the currently installed software version. 01) While in the main menu, press the UP/DOWN buttons to choose INFO. 02) Press the ENTER button to open the menu. 03) Press the ENTER button again to access the submenu.
Eventspot 60 Q7 Optional remote control Button Function Description On / Off Switch the device ON or OFF Dimmer Master dimmer for RGBWA-UV-Cyan Program Mode Activate built-in program 1 Program Mode Activate built-in program 2 Program Mode Activate built-in program 3...
Eventspot 60 Q7 Blue Increase/Decrease the blue LED intensity White Increase/Decrease the white LED intensity Amber Increase/Decrease the amber LED intensity Cyan Increase/Decrease the cyan LED intensity Increase/Decrease the UV LED intensity Strobe Increase/Decrease the frequency of the strobe (0-25Hz)
Eventspot 60 Q7 DMX Channels 7 Channels HSIC Channel 1 – Dimmer intensity maximum output 0-255 From dark to brightest 0-100% Channel 2 – Hue (color variations) (CH1 and CH4 must be set between 001-255 0-255 Hue from 0-100% Channel 3 – Hue Fine (color variations) (CH1 and CH4 must be set between 001-255...
Eventspot 60 Q7 10 Channels SSP Channel 1 – Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Red dimmer intensity (CH1 must be set between 001-255 0-255 Gradual adjustment Red from 0-100% Channel 3 – Green dimmer intensity (CH1 must be set between 001-255...
Eventspot 60 Q7 13 Channels TOUR Channel 1 – Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Red dimmer intensity (CH1 must be set between 001-255 0-255 Gradual adjustment Red from 0-100% Channel 3 – Green dimmer intensity (CH1 must be set between 001-255...
Page 26
Eventspot 60 Q7 Channel 10 – Strobe (CH1 & CH2, CH3, CH4, CH5, CH6, CH7, or CH8 must be set between 001-255 & CH9 between 11-255 No function 10-50 Strobe flash frequency, from slow to fast (0-25Hz) 51-100 No function...
Eventspot 60 Q7 21 Channels TR16 Channel 1 – Master Dimmer intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Master Dimmer Fine intensity 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 3 – Red dimmer intensity (CH1 must be set between 001-255...
Page 28
Eventspot 60 Q7 Channel 17 – Macros (CH1 must be set between 001-255 0-10 No function 11-30 Red 100% / Green Up / Blue 0% 31-50 Red Down / Green 100% / Blue 0% 51-70 Red 0% / Green 100% / Blue Up...
03) If all of the above appears to be in order, switch the unit on again. 04) If you are unable to determine the cause of the problem, do not open the Eventspot 60 Q7, as this may damage the unit and the warranty will become void.
Page 30
Eventspot 60 Q7 Problem Probable cause(s) Remedy One or more ● Check that power is switched on and fixtures do not No power to the fixture. the battery is charged (green LED in function at all front should light continuously).
Eventspot 60 Q7 Product Specifications Model: Showtec Eventspot 60 Q7 Input Voltage: 24V DC Power consumption: 20W (full output) Operating time at full RGBWA-UV-Cyan 6 hours Operation temperature -20°C to +45°C Charging time 6 hours Spare battery: On request Protection rate:...