Menu Overview - SHOWTEC LED Par 64 36x3W Product Manual

Menu Overview

The LED Par 64 will automatically detect the presence of a DMX signal.
If a DMX signal is present, the DMX LED will blink and the small red strip in the LCD display will light up.
In order to receive a DMX signal, the controller must be attached to a DMX controller by a 3/5-pin DMX
cable and the DMX controller must be turned on.
The LED Par 64 system can operate as a 1, 2, 3 or 7-channel DMX fixture.
Master
DMX
Manual Red, from 0 – 100%
Manual Green, from 0 – 100%
Manual Blue, from 0 – 100%
Strobe speed, from slow to fast (0 – 100%)
Color Flow effect from fast to slow
Color Switch effect from fast to slow
Sound-controlled Mode
DMX Mode 1 (1CH)
DMX Mode 2 (2CH)
DMX Mode 3 (3CH)
DMX Mode 4 (7CH)
11