Set Dimmer Curve; Manual Control; Auto Control - SHOWTEC Pixelbar 16 Q6 User Manual

Pixelbar 16 Q6

Set Dimmer Curve

In this menu you can set the dimmer curve.
01) Press the UP/DOWN buttons to select one of the following 3 options:
● Linear
● S Curve
● Square
02) Press the ENTER button to confirm the selection.

Manual Control

In this menu you can manually adjust the color intensity of the LEDs.
01) Press the UP/DOWN buttons to select one of the following options:
● Red Level
● Green Level
● Blue Level
● Amber Level
● White Level
● UV Level
Press the ENTER button to open the pop-up submenu where you can adjust the values.
Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255.
Press the ENTER button to set the value.

Auto Control

In this menu you can select one of the 13 built-in chases.
01) Press the UP/DOWN buttons to select and activate one of the13 built-in chases: Auto 00 – Auto 12.
Press the ENTER button to open the pop-up submenu where you can adjust the speed of the built-in
chase.
Press the UP/DOWN buttons to adjust the speed. The adjustment range is between 0 and 100 %, from
slow to fast.
Press the ENTER button to set the speed.
Product code: 41308
29